Busted7 first time at the track on new setup
04-08-07 | 09:59 AM
#1
Thread Starter
Full Member
Joined: Aug 2001
Posts: 60
Likes: 0
Busted7 first time at the track on new setup
Posting for him as he's computer challenged. He'll be on here soon enough to go over his setup.
Video: http://media.putfile.com/charlie-108
Timeslip:
Congrats to Charlie! All this on the first time out on a new setup with a 'small' 62-1 and Haltech.
Video: http://media.putfile.com/charlie-108
Timeslip:
Congrats to Charlie! All this on the first time out on a new setup with a 'small' 62-1 and Haltech.
04-08-07 | 10:19 AM
#2
Wait a minute...... Charlie Weaver? Did he turn the boost up or what?
Anyhow, what the hell did he do ?
Damn ! Who says the elderly can't drive !
Congrats Charlie !!!!
Anyhow, what the hell did he do ?
Damn ! Who says the elderly can't drive !
Congrats Charlie !!!!
Last edited by Viking War Hammer; 04-08-07 at 10:25 AM.
04-08-07 | 10:32 AM
#3
Thread Starter
Full Member
Joined: Aug 2001
Posts: 60
Likes: 0
Originally Posted by Viking War Hammer
Wait a minute...... Charlie Weaver? Did he turn the boost up or what?
Anyhow, what the hell did he do ?
Damn ! Who says the elderly can't drive !
Congrats Charlie !!!!
Anyhow, what the hell did he do ?
Damn ! Who says the elderly can't drive !
Congrats Charlie !!!!
04-08-07 | 10:36 AM
#4
Originally Posted by AJT
Yup, Charlie Weaver. Old man can drive! I'll let him explain a bit more.
I already sent Charlie a PM
04-08-07 | 10:48 AM
#5
Thread Starter
Full Member
Joined: Aug 2001
Posts: 60
Likes: 0
Originally Posted by Viking War Hammer
Right on, you coming back to St.Louis to party with us ?
I already sent Charlie a PM
I already sent Charlie a PM
Absolutely. Getting ready to start a new job with a lot of travel anyway, should be plenty of STL trips.
04-08-07 | 12:35 PM
#6
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Three runs and i get a shoe polish message on the window, car needs cage! Boost was spiking about 19 lbs. I need to get rid of cheap ebay manifold. Was also running 10.9 a/f on 98 octane. Full tank of gas and 10 mph head wind. I need to finish the car and be ready the next time i run. Thanks Any suggestions? AARP Racing.
Trending Topics
04-09-07 | 10:18 AM
#8
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
So far i like the e6k and the low compression motor. T11 rotors cermet coated housings and rotors, three mill seals. Rx7 specialties built the motor and tunned by Steve Kan. Its working good well see how long. Thanks Charlie!
04-09-07 | 05:25 PM
#11
Originally Posted by Busted7
Dont forget cruise control. I think i had grocerys too! 
Haha, you're the man.
Lets see some updated pictures of your Blown/Backhalved/2nd Gen
04-10-07 | 06:26 PM
#15
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Eric the secound gen. is getting turbo, i toasted the bearings on the 653 it didnt like 18,000. rpm's. Plus it only made 25 lbs boost. But it needs to go or blow it's been 6 years and just sets in the tralior. I will accept all donations. Thanks!
04-10-07 | 07:06 PM
#16
Originally Posted by Busted7
Eric the secound gen. is getting turbo, i toasted the bearings on the 653 it didnt like 18,000. rpm's. Plus it only made 25 lbs boost. But it needs to go or blow it's been 6 years and just sets in the tralior. I will accept all donations. Thanks!
Let me know.
I'm being serious.
PM Sent!
Last edited by Viking War Hammer; 04-10-07 at 07:15 PM.
04-10-07 | 07:22 PM
#18
Originally Posted by Busted7
My best friend is moveing back from Calif. in aug. and he helped from the beggining, so i have to wait for him. If anything changes ill let you know.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM
