6.97@197mph Sporty Motorsports 13B RX7
12-13-07 | 06:34 PM
#126
12-13-07 | 07:36 PM
#128
LOL
Drag racing is not for the smartest types in the world ONLY the loudest and least talented from what I have seen.
I dont see Mazdaspeed winning LeMans 24 hour running microwreak?
I dont see ANY decent rotary track cars in ANY series running microwreak?
I dont see ANY non rotary cars winning ANY top level championships in ANY country with microwreak?
^^^ Why???? cause they are rubbish at the end of the day, only realy targeted at the hobby types and ammeture racers with little ability & skilz, who know no better, or have very simple basic applications like full throttle 1/4 mile where a carby will do the job. I dont know of any serious playerz who would touch that stuff, not a single one.
They are a hobby ghetto level joke in this country, only used by the lowest of the low, where profits and little effort is highest priority on the table. Its prooven you can use a piece of **** (technology and function wise) to do a fast 1/4 mile, that does not mean that piece of **** is gold, let alone gold plated as you hype it up to be
Keep it real dude, they are a two bit nobody ECU maker with a very very average product, pretty much the laughing stock of the Australian scene and its only popular amoung simple people both inteligence wise and tallent wise (or ones who are only focused on profit above function!) at the end of the day. You can put a #1 on your advertising if your paranoid about being so average as they are
Drag racing is not for the smartest types in the world ONLY the loudest and least talented from what I have seen.
I dont see Mazdaspeed winning LeMans 24 hour running microwreak?
I dont see ANY decent rotary track cars in ANY series running microwreak?
I dont see ANY non rotary cars winning ANY top level championships in ANY country with microwreak?
^^^ Why???? cause they are rubbish at the end of the day, only realy targeted at the hobby types and ammeture racers with little ability & skilz, who know no better, or have very simple basic applications like full throttle 1/4 mile where a carby will do the job. I dont know of any serious playerz who would touch that stuff, not a single one.
They are a hobby ghetto level joke in this country, only used by the lowest of the low, where profits and little effort is highest priority on the table. Its prooven you can use a piece of **** (technology and function wise) to do a fast 1/4 mile, that does not mean that piece of **** is gold, let alone gold plated as you hype it up to be
Keep it real dude, they are a two bit nobody ECU maker with a very very average product, pretty much the laughing stock of the Australian scene and its only popular amoung simple people both inteligence wise and tallent wise (or ones who are only focused on profit above function!) at the end of the day. You can put a #1 on your advertising if your paranoid about being so average as they are
12-13-07 | 07:44 PM
#130
Tell Abel that Eddie will produce a 6 sec time slip when Able produces a 1700 HP dyno sheet.
http://www.youtube.com/watch?v=NnqsaDUBySA
12-14-07 | 06:31 AM
#131
Tell Abel that Eddie will produce a 6 sec time slip when Able produces a 1700 HP dyno sheet.
http://www.youtube.com/watch?v=NnqsaDUBySA
http://www.youtube.com/watch?v=NnqsaDUBySA
Thats cold!
12-14-07 | 11:32 AM
#132
Joined: Dec 2006
Posts: 1,763
Likes: 0
From: bayamon pr, orlando fl, paterson nj
like allen said lets see his 1700hp dyno sheets
where those are @
another pic
12-15-07 | 01:34 AM
#135
ErnieTKiLLA
Joined: Feb 2002
Posts: 972
Likes: 0
From: new york
you know whats funny.. Brent Rau said with no shame in his game, how he uses 75psi of boost. extremely hard to keep the engine together, but he does it and many a times gets great resutls. like his 6 second runs.
If I had the money, I would take on Brent's attitude towards high boost..
If I had the money, I would take on Brent's attitude towards high boost..
12-15-07 | 10:55 PM
#138
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Colon Motorsports 7.635 @ 197.74
Tell Abel that Eddie will produce a 6 sec time slip when Able produces a 1700 HP dyno sheet.
http://www.youtube.com/watch?v=NnqsaDUBySA
http://www.youtube.com/watch?v=NnqsaDUBySA
Colon Motorsports 7.635 @ 197.74
I wonder how much power it takes to run that mph!
12-16-07 | 12:11 AM
#139
InsaneRotaries.com
Joined: Feb 2002
Posts: 2,748
Likes: 0
From: Westchester, NY
video of the 2nd 197mph http://grs-motorsports.com/noticias/...s/15dic/22.wmv
12-16-07 | 01:09 AM
#140
Banned. I got OWNED!!!
Joined: Dec 2006
Posts: 26
Likes: 1
ok, so I know it's a noob question but, how long is the motor lasting (avg.) at those power levels? I've been preaching rotary longevity when it's maintained meticulously and good, at least reasonable, numbers would be a slap in the face to all the rotary haters.
12-16-07 | 03:29 AM
#144
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Videos
Quiles 7.25@184mph
http://www.agracingvideo.com/videos/...quiles7.25.wmv
Papote 7.22@187mph
http://www.agracingvideo.com/videos/...22vsjcr7.6.wmv
Another view of Sporty's 7.63@197mph run.
http://www.agracingvideo.com/videos/...sporty7.63.wmv
All the above tuning was done by senor Gaby Skern!
http://www.agracingvideo.com/videos/...quiles7.25.wmv
Papote 7.22@187mph
http://www.agracingvideo.com/videos/...22vsjcr7.6.wmv
Another view of Sporty's 7.63@197mph run.
http://www.agracingvideo.com/videos/...sporty7.63.wmv
All the above tuning was done by senor Gaby Skern!
Last edited by crispeed; 12-16-07 at 03:40 AM.
12-16-07 | 08:43 AM
#145
740 hp @ 28 psi
Joined: Jun 2006
Posts: 379
Likes: 0
From: MIAMI
Quiles 7.25@184mph
http://www.agracingvideo.com/videos/...quiles7.25.wmv
Papote 7.22@187mph
http://www.agracingvideo.com/videos/...22vsjcr7.6.wmv
Another view of Sporty's 7.63@197mph run.
http://www.agracingvideo.com/videos/...sporty7.63.wmv
All the above tuning was done by senor Gaby Skern!
http://www.agracingvideo.com/videos/...quiles7.25.wmv
Papote 7.22@187mph
http://www.agracingvideo.com/videos/...22vsjcr7.6.wmv
Another view of Sporty's 7.63@197mph run.
http://www.agracingvideo.com/videos/...sporty7.63.wmv
All the above tuning was done by senor Gaby Skern!
12-18-07 | 03:28 AM
#148
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,414
Likes: 0
From: Southern Cali
Guys, anyone have the full run specs... like 60ft time and weight of the car?
Congrats to the boys in PR. The 13B has had the potential (1000+hp) for a good while now, it was just bringing the full package (clutch/chassis/power/etc.) to the table and hitting right. It seems the boys got it right!
Thanks,
-Bern
Congrats to the boys in PR. The 13B has had the potential (1000+hp) for a good while now, it was just bringing the full package (clutch/chassis/power/etc.) to the table and hitting right. It seems the boys got it right!
Thanks,
-Bern
see what i was talking about in my last post