Will Leaded Race Gas Hurt My Car?
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Right Here!
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Will Leaded Race Gas Hurt My Car?
I just got off the phone with my local speed shop to see if I could get some race gas. They have 114 octane, but it's leaded!
They told me that it doesn't have much lead in it and it won't hurt anything except it will clog up your cats. I don't have cats, so that's no problem.
Any of you run leaded race gas in your 7's?
They told me that it doesn't have much lead in it and it won't hurt anything except it will clog up your cats. I don't have cats, so that's no problem.
Any of you run leaded race gas in your 7's?
#2
NYC's Loudest FD
Leaded gas will positive effects due to having a higher octane and also since it contains lead, it has lubricating properties, henceforth the apex seals will get better lubrication. As far as any negative effects, the only 2 that I know of will be that the catalytic converters will get clogged(doesn't matter if you have a midpipe), and also it will decrease the lifespan of the oxygen(O2) sensor considerably, that's about it.
#3
Do you have a lot of mods that require the higher octane? Isn't it true that cars don't benefit from higher octane unless they need it? How would you know if you need or can benefit from higher octane?
#5
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Right Here!
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
I found some unleaded 107 octane race gas. Went out and tested with it last night. A very noticable improvement!
I will find out this Sunday. Going to the track.
*********** 87 Mazda RX-7 Turbo II ************
*88 J-Spec Engine *Bonez Intake *TO4 Proturbo
*Greddy Turbo Timer *Greddy A/F Meter w/4 wire O2 sensor
*Greddy FMIC *Walbro Fuel Pump *720cc Secondaries
*Apex SAFC *Greedy Type R BOV *Bonez Street/Strip Clutch
*Apex S-AVCR Boost Controller *Bonez Downpipe
*ACV/Air Pump Removal *Fuel Pump Re-wire *Ported Wastegate
*Jacobs Rotary Pro Ignition *3" Turbo Inlet Duct
*Red Silicone Vacuum Lines *Magnecor 10mm Wires
*Optima Red Top Battery *Throttle Body Mod.
*Suspension Specialties Sway Bars *Apex GT Exhaust
*Falken Tires-205/55/R16 Front Nitto NT-555R 225/50VR16 Back
*RB FCD *2700 LBS.
*********** MOVIES ************
http://gallery.rx7club.com/images/videos/100plus.avi
http://gallery.rx7club.com/images/videos/burnout.avi
http://gallery.rx7club.com/images/vi...urbo-incar.avi
http://gallery.rx7club.com/images/videos/TurbovsNA.avi
http://home.rmci.net/panther/13_7.avi
*************************************************
*See at: http://home.rmci.net/panther/turbo.htm
I will find out this Sunday. Going to the track.
*********** 87 Mazda RX-7 Turbo II ************
*88 J-Spec Engine *Bonez Intake *TO4 Proturbo
*Greddy Turbo Timer *Greddy A/F Meter w/4 wire O2 sensor
*Greddy FMIC *Walbro Fuel Pump *720cc Secondaries
*Apex SAFC *Greedy Type R BOV *Bonez Street/Strip Clutch
*Apex S-AVCR Boost Controller *Bonez Downpipe
*ACV/Air Pump Removal *Fuel Pump Re-wire *Ported Wastegate
*Jacobs Rotary Pro Ignition *3" Turbo Inlet Duct
*Red Silicone Vacuum Lines *Magnecor 10mm Wires
*Optima Red Top Battery *Throttle Body Mod.
*Suspension Specialties Sway Bars *Apex GT Exhaust
*Falken Tires-205/55/R16 Front Nitto NT-555R 225/50VR16 Back
*RB FCD *2700 LBS.
*********** MOVIES ************
http://gallery.rx7club.com/images/videos/100plus.avi
http://gallery.rx7club.com/images/videos/burnout.avi
http://gallery.rx7club.com/images/vi...urbo-incar.avi
http://gallery.rx7club.com/images/videos/TurbovsNA.avi
http://home.rmci.net/panther/13_7.avi
*************************************************
*See at: http://home.rmci.net/panther/turbo.htm
#6
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by djantlive
Do you have a lot of mods that require the higher octane? Isn't it true that cars don't benefit from higher octane unless they need it? How would you know if you need or can benefit from higher octane?
Do you have a lot of mods that require the higher octane? Isn't it true that cars don't benefit from higher octane unless they need it? How would you know if you need or can benefit from higher octane?
#7
Banned. I got OWNED!!!
Join Date: Mar 2001
Location: Georgia
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Unless you plan on running crazy boost (24+ psi) there's really no reason to run leaded 117 octane. You would have to have your ignition turned up quite a bit to benefit from it. If you don't turn up the ignition (which you have to be real careful with) you're just gonna foul your plugs.
Best bet is to try and find something with a rating around 107 octane. I'm running 18 psi on 93 pump gas ( good pump gas). Even at 18 psi, if I run 110 leaded fuel it'll foul the plugs.
Best bet is to try and find something with a rating around 107 octane. I'm running 18 psi on 93 pump gas ( good pump gas). Even at 18 psi, if I run 110 leaded fuel it'll foul the plugs.
Trending Topics
#8
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
I ran VP C16 which is 116 octane and leaded when I ran my 11.1.
The plugs fouled a bit easier but the car ran heaps better and with a greater safety margin than running 23psi and pup fuel.
To be safe, you should run it.
The plugs fouled a bit easier but the car ran heaps better and with a greater safety margin than running 23psi and pup fuel.
To be safe, you should run it.
#9
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Leaded fuel will give you more power, but if you do not advance your ignition you will not see the gains. A company called Millenium makes a 110 unleaded that is availible, you can try that (I have never used it). Race gas is easy to get ahold of, pick your manufacturer and then contact them for the nearest dealer. My dealer delivers to my doorstep, so I don't even need a truck to pick it up.
Don't forget that O2 sensors will last around 20-50 hours on leaded fuel.
Don't forget that O2 sensors will last around 20-50 hours on leaded fuel.
#10
Full Member
Join Date: Oct 2001
Location: newport news, VA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I heard that you could buy a gallon of jet fuel (high oct.)from an airport and put it in your tank, finish filling it with pump gas and the oct. will be raised higher for hella cheaper....never tried it though.
#11
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Mixing fuel is a cheap way of increasing octane, just don't be dumb and buy some unknown avation fuel. A lot of people run 3 gallons of 100 with there pump fuel when they go to the track for some extra protection.
Rev. Jay
http://ricemobile.net/
Rev. Jay
http://ricemobile.net/
#12
Old [Sch|F]ool
Originally posted by rx-7 crazy
I heard that you could buy a gallon of jet fuel (high oct.)from an airport and put it in your tank, finish filling it with pump gas and the oct. will be raised higher for hella cheaper....never tried it though.
I heard that you could buy a gallon of jet fuel (high oct.)from an airport and put it in your tank, finish filling it with pump gas and the oct. will be raised higher for hella cheaper....never tried it though.
Jet fuel is kerosene, or diesel fuel, I forget which but they're very similar to each other anyway. Gasoline cars will not run on kerosene. (People regularly dum excess kerosene from a camping trip in their tanks when it's almost empty - doesn't work!)
#14
W. TX chirpin Monkey
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
don't use jet fuel......trust me u don't want to go that route. my best friend works as liquid fuels specialist for the air force and he states that jet fuel in actuality is a lot like diesel w/ similar burning characteristics. so now you have been warned.. aviation gas differs and unless you know what you're buying....i'd stick w/ 107race gas..
#15
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
it depends, one airplane fuel is like high-octane gas, and one is like diesel. I forget which is which, I *THINK* propellor engine fuel is like high-octane gas, and that Jet fuel is like diesel. Matter of fact I'm pretty sure of it now, because jet fuel is hard to get burning, I think jet fuel is like the diesel, and prop fuel is more like high-octane gas, but DON'T quote me on that.
#16
Junior Member
Join Date: Nov 2003
Location: Snoresville, Ga
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Barwick
it depends, one airplane fuel is like high-octane gas, and one is like diesel. I forget which is which, I *THINK* propellor engine fuel is like high-octane gas, and that Jet fuel is like diesel. Matter of fact I'm pretty sure of it now, because jet fuel is hard to get burning, I think jet fuel is like the diesel, and prop fuel is more like high-octane gas, but DON'T quote me on that.
it depends, one airplane fuel is like high-octane gas, and one is like diesel. I forget which is which, I *THINK* propellor engine fuel is like high-octane gas, and that Jet fuel is like diesel. Matter of fact I'm pretty sure of it now, because jet fuel is hard to get burning, I think jet fuel is like the diesel, and prop fuel is more like high-octane gas, but DON'T quote me on that.
#17
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Toad[^_^]
WTF are you talking about?! I'm currently stationed on a military base where I work directly with jet-fuel 5 days a week. Jet fuel is a combination of gasoline and kerosene and it is about as flammable as any other type of fuel. So much so in fact that using it in your typical internal combustion engine will more than likely burn up your bearings and seals. All the engines that I no of (in the military) that is high and low bypass turbofan, turboprop, turbine, whatever, run on the same grade of jet fuel; JP8. In the future please don't mislead people. Anyone who has been through intial aircraft maintenance training would be able to tell that you are talking out of your ***... (Yes I realize how old this is but it had to be done.)
WTF are you talking about?! I'm currently stationed on a military base where I work directly with jet-fuel 5 days a week. Jet fuel is a combination of gasoline and kerosene and it is about as flammable as any other type of fuel. So much so in fact that using it in your typical internal combustion engine will more than likely burn up your bearings and seals. All the engines that I no of (in the military) that is high and low bypass turbofan, turboprop, turbine, whatever, run on the same grade of jet fuel; JP8. In the future please don't mislead people. Anyone who has been through intial aircraft maintenance training would be able to tell that you are talking out of your ***... (Yes I realize how old this is but it had to be done.)
Dude, read my post "I *think* this is the case"... get your panties out of your **** and take a deep breath.
#18
VVThat's meVV
Join Date: Oct 2003
Location: Austin, TX
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
JP8 is a high grade like-desiel. It has a higher flash point than JP4 which is why we use it in the military now. DO NOT USE JET FUELS IN YOUR CAR. Avgas is high octane(usally leaded) gas. It can be safe but not recommended as much as simple race gas. And thats because with that you know what you are getting exactlly. And yes I work with JP8 every day with my job as a BlackHawk Crewchief here in Bosnia.
#19
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Klar
JP8 is a high grade like-desiel. It has a higher flash point than JP4 which is why we use it in the military now. DO NOT USE JET FUELS IN YOUR CAR. Avgas is high octane(usally leaded) gas. It can be safe but not recommended as much as simple race gas. And thats because with that you know what you are getting exactlly. And yes I work with JP8 every day with my job as a BlackHawk Crewchief here in Bosnia.
JP8 is a high grade like-desiel. It has a higher flash point than JP4 which is why we use it in the military now. DO NOT USE JET FUELS IN YOUR CAR. Avgas is high octane(usally leaded) gas. It can be safe but not recommended as much as simple race gas. And thats because with that you know what you are getting exactlly. And yes I work with JP8 every day with my job as a BlackHawk Crewchief here in Bosnia.
#20
Junior Member
Join Date: Nov 2003
Location: Snoresville, Ga
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Barwick
Let ye with 5 posts come in and start throwing crap around...
Dude, read my post "I *think* this is the case"... get your panties out of your **** and take a deep breath.
Let ye with 5 posts come in and start throwing crap around...
Dude, read my post "I *think* this is the case"... get your panties out of your **** and take a deep breath.
#21
I wish I was driving!
Originally posted by Toad[^_^]
WTF are you talking about?! I'm currently stationed on a military base where I work directly with jet-fuel 5 days a week. Jet fuel is a combination of gasoline and kerosene and it is about as flammable as any other type of fuel. So much so in fact that using it in your typical internal combustion engine will more than likely burn up your bearings and seals. All the engines that I no of (in the military) that is high and low bypass turbofan, turboprop, turbine, whatever, run on the same grade of jet fuel; JP8. In the future please don't mislead people. Anyone who has been through intial aircraft maintenance training would be able to tell that you are talking out of your ***... (Yes I realize how old this is but it had to be done.)
WTF are you talking about?! I'm currently stationed on a military base where I work directly with jet-fuel 5 days a week. Jet fuel is a combination of gasoline and kerosene and it is about as flammable as any other type of fuel. So much so in fact that using it in your typical internal combustion engine will more than likely burn up your bearings and seals. All the engines that I no of (in the military) that is high and low bypass turbofan, turboprop, turbine, whatever, run on the same grade of jet fuel; JP8. In the future please don't mislead people. Anyone who has been through intial aircraft maintenance training would be able to tell that you are talking out of your ***... (Yes I realize how old this is but it had to be done.)
You can compare activation energy of combustion (the energy required to start a chemical reaction) to the energy produced during an exothermic chemcial reaction; there is no correlation.
So comparing flammability to (burning up bearins and seals) is completely irrelevant, and thus your posts are completely moot.
In fact, not only is your point incorrect, but the person whom you blasted WAS correct in his very basic post: it is easier to set fire to iso-octane (gasoline) than it is to set fire to jet fuel, mostly due to iso-octanes ability to readily evaporate.
Your "I learned about fire hazards in basic training" education should keep to itself when discussing kinetics, a subject of which you completely lack any knowledge in.
#22
I wish I was driving!
Originally posted by Toad[^_^]
Let those who speak with knowledge speak and those who have none listen. I don't come in here and try to explain rotarys to anybody (hence the 5 post) but after viewing a few of you're other post, I couldn't let this one slide. All I ask is that you don't mislead people and give them a false sense that they have learned something when you really don't know what you are talking about. I'm not angry just very concerned that some one might get the misconception that jet fuel is simply "high octane" race fuel: a potentially hazardous misunderstanding.
Let those who speak with knowledge speak and those who have none listen. I don't come in here and try to explain rotarys to anybody (hence the 5 post) but after viewing a few of you're other post, I couldn't let this one slide. All I ask is that you don't mislead people and give them a false sense that they have learned something when you really don't know what you are talking about. I'm not angry just very concerned that some one might get the misconception that jet fuel is simply "high octane" race fuel: a potentially hazardous misunderstanding.
Welcome to the forum. Sorry you had to get such a quick lesson on why you shouldn't spew off on subjects in which your are inscient.
#23
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Toad[^_^]
Let those who speak with knowledge speak and those who have none listen. I don't come in here and try to explain rotarys to anybody (hence the 5 post) but after viewing a few of you're other post, I couldn't let this one slide. All I ask is that you don't mislead people and give them a false sense that they have learned something when you really don't know what you are talking about. I'm not angry just very concerned that some one might get the misconception that jet fuel is simply "high octane" race fuel: a potentially hazardous misunderstanding.
Let those who speak with knowledge speak and those who have none listen. I don't come in here and try to explain rotarys to anybody (hence the 5 post) but after viewing a few of you're other post, I couldn't let this one slide. All I ask is that you don't mislead people and give them a false sense that they have learned something when you really don't know what you are talking about. I'm not angry just very concerned that some one might get the misconception that jet fuel is simply "high octane" race fuel: a potentially hazardous misunderstanding.
#24
There are a few types of Avgas.
87, 100, and 100LL (low lead). I believe the colors are red, green, and blue. I do believe the number stands for octane rating, but I'm not sure either. Just don't use red
87, 100, and 100LL (low lead). I believe the colors are red, green, and blue. I do believe the number stands for octane rating, but I'm not sure either. Just don't use red