Slicks
Slicks
But I wouldnt say that I am using them 
03-07-02 | 07:38 AM
#7
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,375
Likes: 0
From: The First State
I don think they make the 16" tire anymore but you can get the MT 26 X 10 X 15" Here
http://www.jegs.com/cgi-bin/ncommerc...112&prmenbr=76
http://www.jegs.com/cgi-bin/ncommerc...112&prmenbr=76
Trending Topics
03-07-02 | 08:04 PM
#8
Full Member
Joined: Aug 2001
Posts: 152
Likes: 0
From: New york
They still do make 16" tires for ET streets:
http://www.mickeythompsontires.com/d..._etstreet.html
You can get 35x22.5-16, 26x11.5-16 or 26x10.5-16
http://www.mickeythompsontires.com/d..._etstreet.html
You can get 35x22.5-16, 26x11.5-16 or 26x10.5-16
03-07-02 | 09:43 PM
#10
Rotary Freak
Joined: Feb 2001
Posts: 2,149
Likes: 0
From: Okinawa, Japan
03-07-02 | 10:18 PM
#11
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
...for 150 m
03-08-02 | 04:43 AM
#12
how can you get 29's to fit in I can bearly fit the 28's 10.5 had to set my coilover all the way to the top.
im looking for some 26 x 10 and wheels
I have never bought wheels for slicks before what is the the right size and offset and that stuff for an FC that is not tub'd out.
im looking on here
http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat=
im looking for some 26 x 10 and wheels
I have never bought wheels for slicks before what is the the right size and offset and that stuff for an FC that is not tub'd out.
im looking on here
http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat=
Last edited by 87GTR; 03-08-02 at 04:47 AM.
03-08-02 | 05:45 AM
#13
Thread Starter
20B N/A Wide Body FC3S
Joined: Feb 2001
Posts: 797
Likes: 1
From: Okinawa Japan
What size and off set in inches for the FD as well... The Japanese use a diffrent method of calculating offset...
Thanks,
Chris
Thanks,
Chris
Originally posted by 87GTR
how can you get 29's to fit in I can bearly fit the 28's 10.5 had to set my coilover all the way to the top.
im looking for some 26 x 10 and wheels
I have never bought wheels for slicks before what is the the right size and offset and that stuff for an FC that is not tub'd out.
im looking on here
http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat=
how can you get 29's to fit in I can bearly fit the 28's 10.5 had to set my coilover all the way to the top.
im looking for some 26 x 10 and wheels
I have never bought wheels for slicks before what is the the right size and offset and that stuff for an FC that is not tub'd out.
im looking on here
http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat=
03-08-02 | 06:29 AM
#14
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,375
Likes: 0
From: The First State
Originally posted by 87GTR
how can you get 29's to fit in I can bearly fit the 28's 10.5 had to set my coilover all the way to the top.
how can you get 29's to fit in I can bearly fit the 28's 10.5 had to set my coilover all the way to the top.
03-12-02 | 06:44 AM
#18
H&R 25mm but if you going to do alot of drag racing i would just get wheels that fit with out spacers.
once I get some slicks and wheels that are the right size then I will take off my spacer.
once I get some slicks and wheels that are the right size then I will take off my spacer.
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
Suspension/Wheels/Tires/Brakes
72
06-17-16 04:48 AM
23Racer
Race Car Tech
1
09-21-15 11:48 AM
