Rotary Car Performance General Rotary Car and Engine modification discussions.

MSD 6 or CRANE HI-6?

Thread Tools
 
Search this Thread
 
Old 09-10-07 | 05:55 PM
  #1  
bop_rocco's Avatar
Thread Starter
NOPSTNZ
iTrader: (13)
 
Joined: Apr 2007
Posts: 172
Likes: 0
From: Elloree, SC
MSD 6 or CRANE HI-6?

I think i need to go with a msd or crane ignition box to help me out. At full boost and around 6 to 7k rpm i get a hesitation more noticeable in 3rd and 4th gear. should this solve my problem? I have 1300 cc secondaries, supra pump, power fc running 14lbs on stock turbos, not shure what else you all need to know. Also i see if i go with the crane hi-6 there is a couple diffrent part #'s available, whats the one i need thanks.
Old 09-10-07 | 11:43 PM
  #2  
diabolical1's Avatar
Moderator
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,936
Likes: 327
From: FL
not convinced that either one of those is going to solve your problem.

what exhaust are you running?
what plugs?
in what condition are your ignition components? (coils, wires, etc.)
Old 09-12-07 | 01:35 PM
  #3  
bop_rocco's Avatar
Thread Starter
NOPSTNZ
iTrader: (13)
 
Joined: Apr 2007
Posts: 172
Likes: 0
From: Elloree, SC
exhaust is racing beat dual tip for the moment, w/ 3" downpipe and midpipe with cat that has been gutted. as far as the plugs i think the stock 7's and 9's not shure though just got the car few months ago. and coils wires ect i think have around 25-30k miles on them.
Old 09-13-07 | 10:28 AM
  #4  
shock's Avatar
Banned. I got OWNED!!!
 
Joined: Sep 2007
Posts: 15
Likes: 0
From: EG
Hiiiiiiiiiiiiiiiii

GoooooD men! see ya sooooooon
Old 09-13-07 | 10:37 AM
  #5  
shock's Avatar
Banned. I got OWNED!!!
 
Joined: Sep 2007
Posts: 15
Likes: 0
From: EG
Hiiiiiiiiiiiiiiiii

GoooooD men! see ya sooooooon
Old 09-13-07 | 10:45 AM
  #6  
shock's Avatar
Banned. I got OWNED!!!
 
Joined: Sep 2007
Posts: 15
Likes: 0
From: EG
Hiiiiiiiiiiiiiiiii

GoooooD men! see ya sooooooon
Old 09-13-07 | 01:02 PM
  #7  
shock's Avatar
Banned. I got OWNED!!!
 
Joined: Sep 2007
Posts: 15
Likes: 0
From: EG
Hiiiiiiiiiiiiiiiii

GoooooD men! see ya sooooooon
Old 09-14-07 | 06:43 AM
  #8  
PDF's Avatar
PDF
Full Member
 
Joined: Nov 2003
Posts: 187
Likes: 7
From: .
Check the spark plugs! and if in doubt replace them!
Old 09-14-07 | 06:58 AM
  #9  
Latin270's Avatar
Eats, Sleeps, Dreams Rotary

 
Joined: Jul 2004
Posts: 3,247
Likes: 2
From: Allentown, PA - Paterson, NJ
As far as your choices go, I had both and the CRANE HI-6 is a better made product and superior than the MSD in many ways!
Old 09-16-07 | 03:37 PM
  #10  
diabolical1's Avatar
Moderator
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,936
Likes: 327
From: FL
start by changing the plugs. if that doesn't fix things, then check your fuel mixtures in that RPM range. i'm not convinced that you'll NEED ignition amplfication at any power level the stock twins will produce, unless there is something wrong with the components themselves or the electrical path that feeds them.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 07:47 AM
eplusz
General Rotary Tech Support
15
10-07-15 05:04 PM
gxl90rx7
Haltech Forum
4
09-14-15 04:09 PM




All times are GMT -5. The time now is 11:16 PM.