Who here has the fastest street driven 12A?

I do not see many 1/4 mile times for them around.

 

that title would belong to rob lives
mazdaracing.com runs 10's on stock nikki carb(modified of course) and manifold
stock tranny and rear

 

Mine's all motor, daily driven, and still has an UNmodified stock carb.

 

you must be proud of your 20 year old carb :p

 

A friend of mine here in Miami ran 10.39@130mph on his daily driven 85 GSL-SE powered by a 12A turbo with Haltech!
Another friend also ran in the 10's with a 12A turbo blowing thru a carb!

crispeed

 

crispeed, Are you talking about the mazdaracing.com cars or another bunch?

 

he's talking about miami cars
mazracing is in CA

 

oh.......duh

 

Theres a rx3 with a 12a turbo in australia that runs 10.4 street car .

 

12A turbo in P.R. not a street car but a very fast 12A 8.47@161mph

 

my friend has a rx3 sp with a bridegported 12a. dont know if its fast at all.

 

**** mazdaracing!!!

 

Greg,

What's wrong with Mazdaracing.com? I have never had experiences with them. Is there one you would like to share?

 

Hey crispeed i'm from miami, where about you at. Do you have a shop? See, i'm still fairly new to this forum so i don't everyone and whatnot. You ever go out and cause a rukus? Anyways i'm interested in building my own 12a webber blow through setup.....got lots of ideas and acces to any metals, tig, mill, lath and all the wonderful manufacturing goodies. drop me a line maybe we'll cruise or sumthing.

rx7doyle@hotmail.com

 

Yeah I'll never buy anything from those ******** again....

 

Hey crispeed and buzztime could you elaborate on these setups you speak of a little more?

cheers

 

i can't remember what the motor was, but a guy in austrailia runs 9's in a stock bodied 1st gen. www.dysonrotary.com.au

 

yea the green one that runs a 13B not a 12A and uses a jerico tranny
which isnt streetable

he asked fastest STREET driven 12A

switche in miami is running 11's with a black 1st gen
I'm sure chris knows who i'm talking about

but mazdaracing drives that car on the street dialy and there are videos
to prove it on there site.

 

Why isn't a Jerico streetable?

 

Yeah, the mazdaracing car is pretty fast. I would not want to race them in my 3rd gen. 12A that runs 10 sec 1/4 mi is not something to shake a stick at. Turbo with a blow through setup... 500 some odd rwhp. looks like hell but the thing gets up and moves.

 

One of the cars above I mentioned was Switchie's!
It's a 84 12A secondary bridge port with a 62-1 turbo at 28psi blowing through a Holley Carb! It made 460RWHP!
The other one is a friend of mine and his is also an 84 12A but full bridge port with a T-61 at 20 psi running a Haltech F-9 ecu using a 48mm weber throttle body with 2x1600cc and 2x7200cc inj. This car runs consistent 10.30's at 130 mph!
They both are full street legal daily driven cars.

crispeed

Merry Christmas!

 

speaking of 12A's I have a 1983 that needs a good home. If anyone wants it I'll send some details.
Ron

 

Thanks
I don't suppose they have their setups on a page anywhere?

cheers

 

Heres some specs on this Rx3 sedan .Jap import 12a turbo with older rx3 side plates with an extend port.Customary TO4 fitted directly above the engine.Not to sure what psi he is running but it used to run 18 psi and ran 10.9 126mph.Toyota 4 speed,Moser 9inch 31spline axles 6.0:1.Uses BP100 fuel and makes 500hp at the engine. Pictures and Videos can be found at www.pacperformance.com.au. What about the fastest 12a prostreeter or dragcar.The PR's would have a few wouldn't they. Very good site www.neodude.com its my mates site heaps of Aussie rotary pics and Summernats pictures with v8's.

 

Whoops www.pacperformance.com.au