FD beat an Firebird 00-01 V8
12-08-06 | 10:30 AM
#1
Thread Starter
Rotary Enthusiast
Joined: Jul 2006
Posts: 831
Likes: 0
From: RAINELLE WV
FD beat an Firebird 00-01 V8
From Brooklyn but go to school in rochester at MCC. In my math class this guy has a firebird 00-01. One day he was like that hey took this rx-7. Didnt say how it looks like or what year. I think its a 2nd gen alot of them here at rochester. Well anywayz he said that he park next to a red rx-7 and the owner put a body kit to make the car look fast. And his firebird would eat any rx-7 especally the red one. I knew he was talking about mine cuz I'm the only red rx-7 with a body kit. Let him talk but it got to me and i step to him that its my 3rd gen and would BBQ his bird. Keep on the whole entire class. Im pushing like 200 to 210WHP. My injector are bad to T N R lowered my boost and horsepower to accommadate my shity injectors. He was taling about he got like 350 at the wheel and i dont come close. This is my mod Power FC,Greddy exhaust, From auto to stick with a 3.90 rear. 8lb boost. 60% of my injectors working, 6 puck racing clutch, short shifter. At the light we waited till it hit green. once it hit we both took off. I didnt get good traction but once i did at 2nd i cought up to him. I was like at 6 to 7 rpm. gas it more gas and shift it at 8500 . once i gotten to 3rd and 4th he was no where to be seen. Next day he was like that i had nos and he is going to get his Boy car to race me a mustang with a supercharger and shyt. Told him in the spring i would gladly race the mustang. Hopefully by that time i dont a rebuilt and and better injector. Im aiming for Street port and polish, 3MM seal. port my twins, Fmic greddy, apexi down,mid and exhaust piping. greddy elbow and thinking about HKS blow vaule or apexi Blow vaule. then i'll be mad happy. hope you like my kill
12-08-06 | 12:47 PM
#6
Senior Member
Joined: Nov 2006
Posts: 521
Likes: 0
From: West Palm Beach,FL
Originally Posted by rotory4life
From Brooklyn but go to school in rochester at MCC. In my math class this guy has a firebird 00-01. One day he was like that hey took this rx-7. Didnt say how it looks like or what year. I think its a 2nd gen alot of them here at rochester. Well anywayz he said that he park next to a red rx-7 and the owner put a body kit to make the car look fast. And his firebird would eat any rx-7 especally the red one. I knew he was talking about mine cuz I'm the only red rx-7 with a body kit. Let him talk but it got to me and i step to him that its my 3rd gen and would BBQ his bird. Keep on the whole entire class. Im pushing like 200 to 210WHP. My injector are bad to T N R lowered my boost and horsepower to accommadate my shity injectors. He was taling about he got like 350 at the wheel and i dont come close. This is my mod Power FC,Greddy exhaust, From auto to stick with a 3.90 rear. 8lb boost. 60% of my injectors working, 6 puck racing clutch, short shifter. At the light we waited till it hit green. once it hit we both took off. I didnt get good traction but once i did at 2nd i cought up to him. I was like at 6 to 7 rpm. gas it more gas and shift it at 8500 . once i gotten to 3rd and 4th he was no where to be seen. Next day he was like that i had nos and he is going to get his Boy car to race me a mustang with a supercharger and shyt. Told him in the spring i would gladly race the mustang. Hopefully by that time i dont a rebuilt and and better injector. Im aiming for Street port and polish, 3MM seal. port my twins, Fmic greddy, apexi down,mid and exhaust piping. greddy elbow and thinking about HKS blow vaule or apexi Blow vaule. then i'll be mad happy. hope you like my kill
New York's school systems have clearly failed us...
Trending Topics
12-08-06 | 01:22 PM
#9
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
yo why dont all you ******* just concentrate on the ******* race and not on the ******* spelling. Sometimes we substitue words and or letters for the **** of it. this is a automotive forum for RX-7 not a frigging spelling forum for teachers.
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
12-08-06 | 02:05 PM
#11
Full Member
Joined: Apr 2006
Posts: 133
Likes: 0
From: the earth
Originally Posted by BackyardSog
Nice kill. Now fix your car and go to school
agreed again.
also what yearish fbody? and honestly i really can't tell what you are trying to say. not trying to bash you having the english skill level of a 6 year old... but i really can't tell what the hell you said.
12-08-06 | 03:32 PM
#12
Senior Member
Joined: Nov 2006
Posts: 521
Likes: 0
From: West Palm Beach,FL
Originally Posted by ROTARYROCKET7
yo why dont all you ******* just concentrate on the ******* race and not on the ******* spelling. Sometimes we substitue words and or letters for the **** of it. this is a automotive forum for RX-7 not a frigging spelling forum for teachers.
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
12-08-06 | 04:47 PM
#13
Here.
Maybe I can help
nice kill. But I doubt that guy had 350 to the wheels. Given your RWHP #'s and description on how you left him behind. Either he has less than 350 or you have more than 210.
Like I said nice kill.
Maybe I can help
Originally Posted by rotory4life
What up fellas,
I am from Brooklyn but I go to school in Rochester at MCC.
Anyway in my math class, there is this guy who has a 2001 firebird. One day he was bragging about how he spanked this rx-7. Though he did not give a description nor gave a model year, I assumed that it was 2nd gen. Because there are quite a few of those running around here at Rochester.
Well anyhow, the other day he said that he parked next to a red rx-7 with a body kit on it. "Obviously, the owner put it on there to make it look fast". Then he went on to say that his firebird would eat any rx-7, especially the red one. Well since around here I have the only red rx-7 with a body kit, I knew that he was referring to mine. I let him talk, but after a while it got to me so I approached him in front of the whole class and vocalized "that is my 3rd gen and it would BBQ your bird. and I'm only pushing like 200 to 210WHP, I am running at a lower boost because my injectors are acting up". So of course he goes on about how his ride has 350 to the wheels and that I don' even come close. We made plans to run later that day.
My current mods are:
Power FC
Greddy exhaust
Converted from an auto to stick with a 3.90 rear.
6 puck racing clutch
Short shifter.
Boost set @ 8lb boost because of my injectors
We get together later on that day and line up at a light. On green we both hit it and take off. He actually got the jump on me due to wheel spin on 1st that I experienced. On second gear and at around 6k to 7k RPM I caught up. Continued on the gas until I shifted at 8.5K RPM. By the time I hit 3rd and 4th he was no where to be seen. DUSTED!
The next day he was making claims that I had N2O and that he is going to get his Boy's car to race me. Apparently, it's a mustang with a supercharger and shiet. I said "no problem, but your boy is going to have to wait until spring. Because that is when I should be done upgrading my car".
By spring time I hope to have my engine streetported and rebuilt using 3mm seals. Plus additional mods including: Ported turbos, greddy FMIC, apexi DP, MP, and catback, a greddy elbow, and a blow off valve either HKS or apex'i. I haven't decided which one yet. I should be stoked with those mods.
well that's it! I hope that you all like my kill
I am from Brooklyn but I go to school in Rochester at MCC.
Anyway in my math class, there is this guy who has a 2001 firebird. One day he was bragging about how he spanked this rx-7. Though he did not give a description nor gave a model year, I assumed that it was 2nd gen. Because there are quite a few of those running around here at Rochester.
Well anyhow, the other day he said that he parked next to a red rx-7 with a body kit on it. "Obviously, the owner put it on there to make it look fast". Then he went on to say that his firebird would eat any rx-7, especially the red one. Well since around here I have the only red rx-7 with a body kit, I knew that he was referring to mine. I let him talk, but after a while it got to me so I approached him in front of the whole class and vocalized "that is my 3rd gen and it would BBQ your bird. and I'm only pushing like 200 to 210WHP, I am running at a lower boost because my injectors are acting up". So of course he goes on about how his ride has 350 to the wheels and that I don' even come close. We made plans to run later that day.
My current mods are:
Power FC
Greddy exhaust
Converted from an auto to stick with a 3.90 rear.
6 puck racing clutch
Short shifter.
Boost set @ 8lb boost because of my injectors
We get together later on that day and line up at a light. On green we both hit it and take off. He actually got the jump on me due to wheel spin on 1st that I experienced. On second gear and at around 6k to 7k RPM I caught up. Continued on the gas until I shifted at 8.5K RPM. By the time I hit 3rd and 4th he was no where to be seen. DUSTED!
The next day he was making claims that I had N2O and that he is going to get his Boy's car to race me. Apparently, it's a mustang with a supercharger and shiet. I said "no problem, but your boy is going to have to wait until spring. Because that is when I should be done upgrading my car".
By spring time I hope to have my engine streetported and rebuilt using 3mm seals. Plus additional mods including: Ported turbos, greddy FMIC, apexi DP, MP, and catback, a greddy elbow, and a blow off valve either HKS or apex'i. I haven't decided which one yet. I should be stoked with those mods.
well that's it! I hope that you all like my kill
Like I said nice kill.
Last edited by Montego; 12-08-06 at 04:53 PM.
12-08-06 | 04:58 PM
#14
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Originally Posted by Authentikdit
Substituting letters..Last time I checked that was called changing a word??And when you have so many "substituted letters",it makes it difficult to follow..So if you can fully understand jibberish then congratulate all you would like,but I think I speak for quite a few of us when I say that I honestly had no idea what he was even attempting to say..You know,sometimes silence is the only substitution for ignorance.
Because-->cuz
Still preserving the context of the word without using it properly but by changing / substituting a letter, I did not change the word or the context, just the physical appearance. Like Rotary (Row-Tah-Ree).
We gotta give him his props for beating the other car. Most likely the other guy was just talking out of his ***, and hes not giving his FD the credit it derserves. Could be the other driver sucked, nevertheless the Rotary won and thats all that mattaz!'
Jason NYC
12-08-06 | 04:59 PM
#15
Ooooooh, custom.
Joined: Oct 2006
Posts: 618
Likes: 0
From: Corona, CA
Nice kill. Sounds like he was trying to say what he had at the engine. No way in hell he had 350 to the wheels or it probably would have been a different race. Either way, good kill, and im not bagging on you at all.
Another case of Rotor > Motor
Another case of Rotor > Motor
12-08-06 | 05:03 PM
#16
Senior Member
Joined: Nov 2006
Posts: 521
Likes: 0
From: West Palm Beach,FL
Originally Posted by ROTARYROCKET7
****--->Shyt
Because-->cuz
Still preserving the context of the word without using it properly but by changing / substituting a letter, I did not change the word or the context, just the physical appearance. Like Rotary (Row-Tah-Ree).
We gotta give him his props for beating the other car. Most likely the other guy was just talking out of his ***, and hes not giving his FD the credit it derserves. Could be the other driver sucked, nevertheless the Rotary won and thats all that mattaz!'
Jason NYC
Because-->cuz
Still preserving the context of the word without using it properly but by changing / substituting a letter, I did not change the word or the context, just the physical appearance. Like Rotary (Row-Tah-Ree).
We gotta give him his props for beating the other car. Most likely the other guy was just talking out of his ***, and hes not giving his FD the credit it derserves. Could be the other driver sucked, nevertheless the Rotary won and thats all that mattaz!'
Jason NYC
12-08-06 | 06:32 PM
#18
Originally Posted by ROTARYROCKET7
yo why dont all you ******* just concentrate on the ******* race and not on the ******* spelling. Sometimes we substitue words and or letters for the **** of it. this is a automotive forum for RX-7 not a frigging spelling forum for teachers.
get your damned car fixed.
12-08-06 | 07:48 PM
#20
Eats, Sleeps, Dreams Rotary
Joined: Mar 2001
Posts: 4,923
Likes: 22
From: CT
Originally Posted by ROTARYROCKET7
yo why dont all you ******* just concentrate on the ******* race and not on the ******* spelling. Sometimes we substitue words and or letters for the **** of it. this is a automotive forum for RX-7 not a frigging spelling forum for teachers.
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
So get off your ******* highhorses and popping **** and give your fellow rotary brother a thumps up for representing.
Stop hating people. Nice Kill Rotary4life.
Keep it Rotary
Jason NYC
12-08-06 | 07:53 PM
#21
Eats, Sleeps, Dreams Rotary
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Originally Posted by Authentikdit
So you read through his whole post and the worst 2 words that you noticed that were changed were "shyt" and "cuz"??
12-08-06 | 09:39 PM
#22
Rotary Freak
Joined: Dec 2001
Posts: 1,802
Likes: 0
From: Macungie, Pennsylvania
I did'nt even finish reading the post because I was tired of trying to decipher it. The part I read was very funny though...."I'm a college student..." and then a bunch of ignorant... english?
12-08-06 | 10:11 PM
#24
Thread Starter
Rotary Enthusiast
Joined: Jul 2006
Posts: 831
Likes: 0
From: RAINELLE WV
i brought the car with the body kit already installed. Thanx for correcting my english. Reason for not fixing my FD is because of money. My flow of money is coming slow and i just moved to Rochester. So i'm not going to sleep on the floor and stuff. I dont race my FD alot, only when d**k head are talking trash about RX-7. But thanx for reading my post and who ever understand it thanx. If you didnt my bad....
