Shoot me a PM or give me a call 434 981 6714 if interested in selling your track FD.

 

Your frame not tweekable?

 

Talked to the body shop and basically it would need lots of massaging on a frame machine which is expensive and it would never be 100%.

However if someone needs a clean title chassis for whatever purpose hehe I have one

 

Well damn...I'll keep my eyes open for you.

 

Hi Fritz,

I'm not sure where your damage is but both my car and Niles' car have sustained big hits in the front. My car has had the frame rail straightened (mostly straight anyway) on the passenger side just at the suspension pick up points. The rail isn't pretty, but the car holds its alignment...

Guy

 

Hi Guy,
Mine was hit hard on passenger side rear wheel which moved the rear tub about 3/4 inch left so the hatch is up a little/over the rear quarter on the right side and there's a gap of about 1 inch on the left between the hatch and rear quarter seam. There's also a pretty good dent or crease on the left quarter in front of the gas fill door where that section was moved left.

My neighbor was outside doing some lawn work last night and he saw the car and came over to ask questions. He races short track stock cars and works at a body shop and he said not to give up yet and that he'd have one of the owners of the shop come by and see if it can be fixed. They have lots of experience fixing damaged race cars LOL.

 

I didn't want to harp on it but....There is a shop here in Norfolk that can get you
straight.http://www.mizelles.net/. Several years ago I was rear ended in my Durango. The roof was actually bent up in the middle. They actually pulled it out
and it drove like new. I was amazed. I know my old Durango wasn't going 160
down the back straight but I'm sure these guys can get you back where you were.
With all the effort you have into setting your car up, seems a shame to start all over again. As long as these guys can get you straight enough to get your alignment, your $$$$ ahead. Randy Mizelle will tell you in short order if it can be done. Cheers!

 

I'm going keep tracking old Red so I won't another track car but I do need a rear sub frame so if anyone has one in the VA area please let me know

 

Fritz,
I have exactly what you need. I have an RZ rear sub-frame I bought from
Japan2la several years ago. Send me a pm if interested.

Cheers!

 

PM'd

 

Am I the only one who want's to know how it got bent?

Sorry Fritz, enquiring minds.......

 

Also wondering what happened.

 

^
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/vir-track-weekend-get-your-fd-track-drive-way-suppose-987504/page7/

start reading around post #181

 

Thanks for checking in guys and yep the above thread has all the details and then some.