unreal-icarus

iTrader: (1)

Hi,

first of all, i read the FAQ, this thread https://www.rx7club.com/showthread.p...er+fc+base+map and searched for more than 1 hour before posting .

I bought a PFC (16bit) for my 99fd and want to install it in april. My car is completely stock except a catback, and some other things that do not affect the engine. I am wondering how the base map of the pfc differs from the base map of the stock ecu. Is there a difference between the 93-95 pfc base map and the 99+ one? Should i apply the changes mentioned in the thread above? Is there any advantage for my car over the stock ecu except all the displayed values and no speed limit?

I read that one guy just blew his engine on the base map without getting it tuned (the fd was stock i think). I just want to be sure to do the right things to prevent any damage.

thanks for help.

R-R-Rx7

iTrader: (24)

dont trust the stock map,

Also, be aware that the versions of the map for the 93-95 -96-98 and 99-2002 are different so you cant just load a 93-95 map u get from the forum on ur pfc. you can play around a bit so sort it out

unreal-icarus

iTrader: (1)

any detailed info?

arghx

iTrader: (3)

In a car that stock, I just don't see the point. It will drive better on the stock ECU. Wait until you decide to modify it further.

unreal-icarus

iTrader: (1)

with the power fc i don't have the speed limit and also all the important values shown on the commander ...

unreal-icarus

iTrader: (1)

bump

unreal-icarus

iTrader: (1)

bump