Power FC power fc not reading air temp
#1
Full Member
Thread Starter
Join Date: Oct 2004
Location: ohio
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
power fc not reading air temp
my power fc is not reading any air intake temps (there is just 3 dashes where the numbers should be). could there be a sensor unpluged? or what could cause this?
thanks
thanks
#2
FD Under Construction =P
iTrader: (5)
yup, 3 dashes = sensor not sending a signal.
if you look in your sensors section under ETC on the power fc, it will probably be black and have 4.98v reading.
The sensor goes just under the UIM I believe, connects to the bottom of the UIM. Should be an easy fix, let us know how it goes.
if you look in your sensors section under ETC on the power fc, it will probably be black and have 4.98v reading.
The sensor goes just under the UIM I believe, connects to the bottom of the UIM. Should be an easy fix, let us know how it goes.
#5
fart on a friends head!!!
if the sensors bad itll give you that as well. . . before mine went TOTALLY bad it read incorrectly and was very intermittent. . . reading negatives under cruise and whatnot. . . very weird. if it was plugged in, just replace it and youll be a happy camper. . .
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM