Power FC PFC + MBC + single turbo + peak and hold ?
#1
R. R. R.
Thread Starter
Join Date: Jun 2004
Location: san jose
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
PFC + MBC + single turbo + peak and hold ?
When using a PFC with a manual boost controller on a single turbo setup, can you use the peak and hold feature from the pfc?
does the primary solenoid connect to the single turbo setup or is it unplugged?
(the electronic peak and hold feature that is highlighted on the pfc next to the actual/current reading from the monitor mode.)
does the primary solenoid connect to the single turbo setup or is it unplugged?
(the electronic peak and hold feature that is highlighted on the pfc next to the actual/current reading from the monitor mode.)
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
Originally Posted by NeedFD
(1) When using a PFC with a manual boost controller on a single turbo setup, can you use the peak and hold feature from the pfc?
(2) does the primary solenoid connect to the single turbo setup or is it unplugged?
(2) does the primary solenoid connect to the single turbo setup or is it unplugged?
(2) Do not know as I never used the PFC for boost control.
#3
R. R. R.
Thread Starter
Join Date: Jun 2004
Location: san jose
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cewrx7r1
(1) The monitor peak and hold is only a form of data logging, not a control for anything.
(2) Do not know as I never used the PFC for boost control.
(2) Do not know as I never used the PFC for boost control.
Right, I am curious to know if pfc would tell me the amount of boost that i ran from the current run. after the run, not during the run.. sorry, don't know how to make it more clear..
#4
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
If it couldn't, the PFC wouldn't be a very good ecu...considering it is just displaying the reading from the MAP sensor!
Why are you to trying to ghetto-rig something? Get a proper electronic boost controller.
Why are you to trying to ghetto-rig something? Get a proper electronic boost controller.
#5
R. R. R.
Thread Starter
Join Date: Jun 2004
Location: san jose
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
If it couldn't, the PFC wouldn't be a very good ecu...considering it is just displaying the reading from the MAP sensor!
Why are you to trying to ghetto-rig something? Get a proper electronic boost controller.
Why are you to trying to ghetto-rig something? Get a proper electronic boost controller.
If i go single turbo, i'd like to have the pfc monitor the peak boost
not ghetto rigging anything, just want some info..
i don't want to use the apex solenoid because i prefer using manual boost controller, but i'd like to have pfc register it for me
but you've just answered my question, boost pressure is calculated from the map.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM