Power FC PFC in car, now wont start?
#1
1 of 203 94 White PEP's
Thread Starter
iTrader: (1)
Join Date: Sep 2001
Location: Suwanee, GA
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
PFC in car, now wont start?
Well i put my pfc and commander in the car yesterday and it fired right up the first time then started doing the learning up down rpm thing, did this for bout 30min then quit so I went for a drive up to the store and it did the jumping up and down a few more times. I got home and the idle seemed to even out and was smooth as silk so I thought I was set right? Well I got in the car today and it wont start at all. It turns over fine but doesent start at all? Anyone know what might be the best solution for this other than just going back to the Pettit ECU I had in there? Any input would be most appreciated other than someone just telling me to do a search, I have done that and dont have hours more to spend on it.
Laterz
Jeremy
Laterz
Jeremy
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
Check all maps that affect idle and starting. Primarily the idle control map and idle encrichment map. Compare to others maps if you can.
Call me tonight and I can tell you about what they should be.
(281) 240-3710 Houston CST after 5PM.
Call me tonight and I can tell you about what they should be.
(281) 240-3710 Houston CST after 5PM.
#3
Senior Member
Join Date: Oct 2003
Location: Lynnwood, WA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Did you pop a fuse? Sounds like something that happened in my Honda once, turned over but not start. I checked all the fuses and the ECU was out. I replaced and haven't had trouble since?!
Thread
Thread Starter
Forum
Replies
Last Post
blkops
3rd Generation Specific (1993-2002)
7
08-12-15 01:30 PM