Power FC pfc base map question...(midpipe)
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: ohio
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
pfc base map question...(midpipe)
i installed my pfc and everything is good ...
i have re v-mount ic ... greddy intake.... dp ....stock twins (10-8-10)(ported wastegate)
just removed the air pump, installed pulleys...and have my rx7store midpipe sitting in the garage...
still running the cat...and stock catback(for now)
was wondering if the base map can handle the midpipe install...
or will i need to be tuned (asap) ???
also when i install a aftermarket catback (i'm assuming it will need tuned then)
just wondering how many mods draw the line...
thanks guys
brad
i have re v-mount ic ... greddy intake.... dp ....stock twins (10-8-10)(ported wastegate)
just removed the air pump, installed pulleys...and have my rx7store midpipe sitting in the garage...
still running the cat...and stock catback(for now)
was wondering if the base map can handle the midpipe install...
or will i need to be tuned (asap) ???
also when i install a aftermarket catback (i'm assuming it will need tuned then)
just wondering how many mods draw the line...
thanks guys
brad
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
If your PFC has the base mod map which they usually come with now:
(1) timing will be more safe than needed
(2) fuel should be OK with the cat, but I would not trust it for the MP.
(1) timing will be more safe than needed
(2) fuel should be OK with the cat, but I would not trust it for the MP.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM