Power FC Is It Ok To Send Pfc To Xs To Tune Without Car
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Maryland, GERMANTOWN
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Is It Ok To Send Pfc To Xs To Tune Without Car
HEY all just wanted to know if it was smart to do that i would like to have it tunred to about 15 to 16 psi and then when i get my wide band ill fine tune it
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
NO, NO, NO! NOT SMART!
I wouldn't trust XS to tune a guitar, let alone my car. And forget a mail-order tune from them.
Mail order tunes do NOT work, in general. You can get a safe map from the rx7store, but it's just a starting point.
You have a T-78, get a real tune. I know there is at least one good tuner in your area and then there is Steve Kan, of course.
I wouldn't trust XS to tune a guitar, let alone my car. And forget a mail-order tune from them.
Mail order tunes do NOT work, in general. You can get a safe map from the rx7store, but it's just a starting point.
You have a T-78, get a real tune. I know there is at least one good tuner in your area and then there is Steve Kan, of course.
#3
Rotary Freak
Join Date: Aug 2002
Location: nyc+li, ny
Posts: 2,690
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
NO, NO, NO! NOT SMART!
Mail order tunes do NOT work, in general. You can get a safe map from the rx7store, but it's just a starting point.
Mail order tunes do NOT work, in general. You can get a safe map from the rx7store, but it's just a starting point.
there are a couple of good tuners in your area. i think demetrious is one of them. i think his screen name is rotor_dee or something like that. try pm'ing rxrotary2_7 for some info as well.
#5
Old School
Join Date: Mar 2001
Location: Baldwin City, KS
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Yea, Don't do it. Waste of money. You could take it to a dyno with WB02 and see how close you are on AFR but dynos sometimes are dangerous for poorly tuned rotaries. Pay a tuner or get a Datalogit and WBO2 setup.
Thread
Thread Starter
Forum
Replies
Last Post