Power FC newest stock map - max psi?
05-09-04, 09:57 AM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
If you read the manual or understood basic ECU functionality..............
The map is tune for vacuum up to about 19PSI boost.
What max boost that you run is determined by the boost control setting in your PFC or external boost controller.
Thus the map is tuned for both 11 and for 12psi boost as you asked.
The map is tune for vacuum up to about 19PSI boost.
What max boost that you run is determined by the boost control setting in your PFC or external boost controller.
Thus the map is tuned for both 11 and for 12psi boost as you asked.
05-10-04, 12:42 PM
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
Go read about the P rows of the maps, and convert absolute pressure to relative pressure. Relative pressure is what our vacuum and boost gauges display.
But unfortunately, the PFC is in error when it calculates and displays boost. Is shows less than what it is. Thus row 20 would be reached at a boost level higher than what the manual states.
But unfortunately, the PFC is in error when it calculates and displays boost. Is shows less than what it is. Thus row 20 would be reached at a boost level higher than what the manual states.
Last edited by cewrx7r1; 05-10-04 at 12:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM