Power FC looking for a map to start with
#1
looking for a map to start with
I've looked here http://rx7.homeip.net/pfc/ and have done a search and didnt really come up with anything.
the closest mod would be GoodfellaFD3S's (minus the street port)
I have the following mods:
DP/MP (Meagan Racing)
Apex'i N1 catback
ported wastegate
Airpump and EGR delete
Stock motor with 77k (new plugs, wires, 02, fuel filter)
Stock airbox
New Act Clutch
I'd have to imagine this setup is pretty common, so if someone could help out that would be awesome.
the closest mod would be GoodfellaFD3S's (minus the street port)
I have the following mods:
DP/MP (Meagan Racing)
Apex'i N1 catback
ported wastegate
Airpump and EGR delete
Stock motor with 77k (new plugs, wires, 02, fuel filter)
Stock airbox
New Act Clutch
I'd have to imagine this setup is pretty common, so if someone could help out that would be awesome.
#2
decided to go with this one for a baseline Pedro Monzon's map
after plugging all the numbers I felt pretty comfortable from where they were from base map (after doing the learn sequence)
after plugging all the numbers I felt pretty comfortable from where they were from base map (after doing the learn sequence)
#3
I would suggest that you use the default 7-07 map from the datalogit site.
Basically a stock map with a little less timing above 6000 and more fuel. I think it is the base map for 1999+ RX-7s.
Basically a stock map with a little less timing above 6000 and more fuel. I think it is the base map for 1999+ RX-7s.
#5
I didnt know he would do that ... I spent plenty of money there LOL
I got on the freeway today and watched some numbers...
knock stays around 20-30
boost is solid at 10psi (.70 kg/cm^2) , no creep or spikes
so far I've been pretty relieved I havent had any major pitfalls.
I got on the freeway today and watched some numbers...
knock stays around 20-30
boost is solid at 10psi (.70 kg/cm^2) , no creep or spikes
so far I've been pretty relieved I havent had any major pitfalls.
Last edited by Cryptic; 10-06-04 at 08:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
befarrer
Microtech
3
08-22-15 05:52 PM