Power FC LA1 for Datalogit available for ordering!
07-28-05, 09:24 AM
#1
Perpetual Rebuilder
Thread Starter
LA1 for Datalogit available for ordering!
For those of you who have been waiting LA1 displays for the datalogit went on sale this morning.
http://www.wbo2.com/la1/default.htm
http://www.wbo2.com/la1/default.htm
08-01-05, 07:22 AM
#6
Perpetual Rebuilder
Thread Starter
Sorry for the confusion..It is a new display for the Techedge Wideband O2 kit. It works in conjunction with the datalogit but my original post was a mistake.
The only complaint that I had about my datalogit/tech edge combo was that I either had to use the old bulky techedge display or view the wideband output on my laptop. Since the sensor for this kits costs about $35 and lasts 100,000 Km I run it all the time and wanted an easy way to keep an eye on it. This guage is the last piece I needed on my tuning setup and I have been waiting about 7 months for it.
Rotarypower101 - below is a post from Peter (the owner of Techedge i think) on their support list.
"The Tech Edge LA1 has a 30 segment display (not 21) with 4 digits (not
3) in the centre. Each of the 30 bars/dots is bi-colour (red/green) so a variety of fancy multi-colour displays are possible.
Also, the LA1 Is not necessarily a dedicated AFR/Lambda meter but can display most quantities logged by a WBo2 unit, or can be set up to display an analogue input sent to it directly. That's why it doesn't say AFR or Lambda on the front.
It's on the order page now and available with either a red or green (but not both) central digits. We're offering it in only the one coloured "black" face with stainless steel bezel at the moment but we hope to have a "white face" version later (this is a cosmetic item and could be changed in the future for just a few dollars). It's also possible to create your own label as it's a simple matter to take the back off to access the face."
So I would think there would be many options to use this in logging..
Shawn
The only complaint that I had about my datalogit/tech edge combo was that I either had to use the old bulky techedge display or view the wideband output on my laptop. Since the sensor for this kits costs about $35 and lasts 100,000 Km I run it all the time and wanted an easy way to keep an eye on it. This guage is the last piece I needed on my tuning setup and I have been waiting about 7 months for it.
Rotarypower101 - below is a post from Peter (the owner of Techedge i think) on their support list.
"The Tech Edge LA1 has a 30 segment display (not 21) with 4 digits (not
3) in the centre. Each of the 30 bars/dots is bi-colour (red/green) so a variety of fancy multi-colour displays are possible.
Also, the LA1 Is not necessarily a dedicated AFR/Lambda meter but can display most quantities logged by a WBo2 unit, or can be set up to display an analogue input sent to it directly. That's why it doesn't say AFR or Lambda on the front.
It's on the order page now and available with either a red or green (but not both) central digits. We're offering it in only the one coloured "black" face with stainless steel bezel at the moment but we hope to have a "white face" version later (this is a cosmetic item and could be changed in the future for just a few dollars). It's also possible to create your own label as it's a simple matter to take the back off to access the face."
So I would think there would be many options to use this in logging..
Shawn
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM