Power FC just instaled pwer fc the i got from a member on here and have some questions
#1
Full Member
Thread Starter
just instaled pwer fc the i got from a member on here and have some questions
i am wondering how do i reset it back to the base map?
is it set up for 850 primary and 1680 sec
i have 550 prim and 1680 sec
im wondering bc after installing and turing it over it surges at idle. found out that if i reset it and do the procedure to let it lern its idle it will fix that. i wold like to do this befor i take it to the shop for tuning that way i can burn all the crap off the turbo from workin on the engine
is it set up for 850 primary and 1680 sec
i have 550 prim and 1680 sec
im wondering bc after installing and turing it over it surges at idle. found out that if i reset it and do the procedure to let it lern its idle it will fix that. i wold like to do this befor i take it to the shop for tuning that way i can burn all the crap off the turbo from workin on the engine
#7
Full Member
Thread Starter
new update got everything put in ran like crap hard idle did research and reset the ecu idles smoother then ever just alittle smoke do to no tune yet should have it to the dyno this week hoping for some decint numbers along with great reliability
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM