I dont know exactly what to put in the commander? I obviously put 1300 at the bottom but I am not sure what else has to be changed.

I can really use some help guys. The car is making a wheezing noise as well. Has good vacuum though so I am trying to figure out the problem.

Thanks- Jerry

 

Whoa, you need to stop playing around and do some reading man or your next post will be detailng how your mtor just blew and now you hate rotaries casue they are so unreliable.
I belive that you can find some help in the ECU discussion areas. I think that there are some base maps. Also go here and at least get a manual so you can have some sort of clue as to what you need to do.http://www.scuderiaciriani.com/rx7/

Add it to your favorites if the server is down and go there later if you have to.

 

Thanks for the help I was hoping that someone who installed these before could just tell me whats need. Just for the injector part of the FC. Im not trying to tune the whole car.
If anyone who has 1300cc injectors and programmed it themslef could help out that would be really helpful.

 

You need the injector lag time programed in . PM Rotorbrain for imfo .

 

DRAGONZ818,

You sure have a lazy attiude! Grow up!

 

i have mine at .16. but you should do a search on the pfc forum to double check

 

Download the manual........Read it It explains how to figure the lag time or rather gives lag times for common injector sizes then you can get close.

For the secondaries just change the injector size and lag time. No need to adjust the percentage, the PFC does it automatically for the secondaries. I am not sure of the Lag time for 1600 CC injectors.