Power FC Forum Apex Power FC Support and Questions.

Power FC I developed the Android PFC Application.

Thread Tools
 
Search this Thread
 
Old 02-12-19 | 10:26 AM
  #101  
N2o_qc's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2017
Posts: 33
Likes: 4
From: Montreal, Quebec
You should consider making your app open source on GitHub so other developers can contribute to this awesome project !
The following users liked this post:
tomatoto (09-08-19)
Old 02-12-19 | 08:58 PM
  #102  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by N2o_qc
You should consider making your app open source on GitHub so other developers can contribute to this awesome project !

Hi. I appreciate your advice.
I am not a software developer.
I collected the data from the link below.
https://www.rx7club.com/power-fc-for...alogit-147597/

I used Android studio as development tool. This is very easy to use.
https://developer.android.com/studio/?hl=ko

If you(who) are a software engineer, it will be easier.
You can also develop with reference to the Blue Communications Source on GitHub.

Thanks
Old 02-13-19 | 06:45 AM
  #103  
N2o_qc's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2017
Posts: 33
Likes: 4
From: Montreal, Quebec
Originally Posted by ds2qwd

Hi. I appreciate your advice.
I am not a software developer.
I collected the data from the link below.
https://www.rx7club.com/power-fc-for...alogit-147597/

I used Android studio as development tool. This is very easy to use.
https://developer.android.com/studio/?hl=ko

If you(who) are a software engineer, it will be easier.
You can also develop with reference to the Blue Communications Source on GitHub.

Thanks
I'm a front end developer.
The RS232 to Bluetooth is the part I don't want to tackle. I looked up the thread you pointed out and this is some serious stuff. You say you are not a software engineer... i think you should consider this career lol
I would really love to contribute to the Ui of this app, add gauges and stuff.
I have an FD with power FC and Commander.. so testing should be easy.
If you change your mind, let me know.
Old 02-24-19 | 08:32 PM
  #104  
AlexG13B's Avatar
brap brap brap
iTrader: (7)
 
Joined: Jul 2003
Posts: 3,150
Likes: 44
From: Florida
i might be interested in purchasing this myself
Old 02-24-19 | 10:55 PM
  #105  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by AlexG13B
i might be interested in purchasing this myself
Hi..
If you want it..
https://www.rx7club.com/3rd-generati...odule-1133374/
Thanks
Old 02-24-19 | 11:03 PM
  #106  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Also, I am developing EMF APP for SR20DET engine. Meybe GTR and MR-S will also be available soon.

Last edited by ds2qwd; 02-24-19 at 11:15 PM.
Old 02-24-19 | 11:09 PM
  #107  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Sorry.. I replied twoice.

Last edited by ds2qwd; 02-24-19 at 11:14 PM.
Old 03-07-19 | 12:18 AM
  #108  
oppa637's Avatar
Rotary Enthusiast
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,246
Likes: 6
From: Houston
Got mine (Actually 2). Works awesome. Now have to figure out how to mount a tablet somewhere to replace the commander. Much easier to read this than the commander.
Old 03-09-19 | 04:47 AM
  #109  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by oppa637
Got mine (Actually 2). Works awesome. Now have to figure out how to mount a tablet somewhere to replace the commander. Much easier to read this than the commander.
Thanks.
I tested EMF APP at 10.1 inches.
At 7 inches or more size, choose 7 inches 1024 * 600[V5.X].
If you need my help, please contact me.


The following users liked this post:
box-o-aces (07-10-19)
Old 03-09-19 | 07:49 AM
  #110  
FührerTüner's Avatar
Penis Healthy
iTrader: (5)
 
Joined: Jul 2013
Posts: 2,596
Likes: 796
From: █▬█ █▄█ █▬█ █▄██▬█ █▄█ █▬█ █▄█
Very cool.
Old 03-15-19 | 04:13 AM
  #111  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Hi..
I added other car ( Silvia SR20DET )
Test App..
https://blog.naver.com/ds2qwd1/221459946191




Last edited by ds2qwd; 03-15-19 at 04:24 AM.
Old 03-27-19 | 12:34 PM
  #112  
derSchwamm's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2014
Posts: 634
Likes: 63
From: Austin TX
This is really cool. I've been building something similar for over a year now, on and off, which allows for display on an iOS app and the headunit, with a raspberrypi driving the head unit and reading from a datalogit. Now that I know RS232 to BLE adapters exist, I might work on a version to bypass the raspberrypi entirely and just make an app. Thank you! And feel free to share what you learned about converting the 232 interface directly to bluetooth if you want to...

https://www.rx7club.com/3rd-generati...ested-1124558/
Old 03-27-19 | 10:24 PM
  #113  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by derSchwamm
This is really cool. I've been building something similar for over a year now, on and off, which allows for display on an iOS app and the headunit, with a raspberrypi driving the head unit and reading from a datalogit. Now that I know RS232 to BLE adapters exist, I might work on a version to bypass the raspberrypi entirely and just make an app. Thank you! And feel free to share what you learned about converting the 232 interface directly to bluetooth if you want to...

https://www.rx7club.com/3rd-generati...ested-1124558/
Thank you. I have created the BT module for UART RS-232 to Bluetooth for PFC ECU direct communication. Also, UART RS-232 to Bluetooth module is connected to Datalogit internal MCU and it is in use. ( For AFR logging )If you do not want to modify the Datalogit, you can use RS-232 to Bluetooth converter. However, it is troublesome to connect a separate power source. I would like to install your iOS APP. I am only developing Android APP.Thanks..
Old 03-28-19 | 06:39 AM
  #114  
derSchwamm's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2014
Posts: 634
Likes: 63
From: Austin TX
Originally Posted by ds2qwd
Thank you. I have created the BT module for UART RS-232 to Bluetooth for PFC ECU direct communication. Also, UART RS-232 to Bluetooth module is connected to Datalogit internal MCU and it is in use. ( For AFR logging )If you do not want to modify the Datalogit, you can use RS-232 to Bluetooth converter. However, it is troublesome to connect a separate power source. I would like to install your iOS APP. I am only developing Android APP.Thanks..
Awesome, right now my app communicates with the raspberrypi which runs a node script that pipes serial data over bluetooth. Basically I used a raspberrypi instead of a serial-to-bluetooth converter directly, mostly so I could drive the car stereo display. Soon I will order a bluetooth dongle and modify the app to work correctly with it, and once that works I'll send it over to you to check out!
Old 03-28-19 | 12:23 PM
  #115  
Str3atWarrior's Avatar
Full Member
iTrader: (1)
 
Joined: Jun 2014
Posts: 223
Likes: 25
From: Montreal, Canada
If i use the adapter with commander connected, both work. But if i use only the adapter, nothing work in the software. I'm probably doing something wrong but cant figure what 🙄
Old 03-28-19 | 05:48 PM
  #116  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by Str3atWarrior
If i use the adapter with commander connected, both work. But if i use only the adapter, nothing work in the software. I'm probably doing something wrong but cant figure what 🙄
Hi.
Please see the manual. ( I emailed you about two weeks ago.)
If you do not use PFC Commander, change the setting by referring to the attached picture.
Thanks.


The following users liked this post:
tomatoto (09-08-19)
Old 03-30-19 | 04:52 AM
  #117  
Str3atWarrior's Avatar
Full Member
iTrader: (1)
 
Joined: Jun 2014
Posts: 223
Likes: 25
From: Montreal, Canada
I totally missed that part! Thanks!
Old 05-23-19 | 09:14 AM
  #118  
aspec_fc's Avatar
Junior Member
 
Joined: Dec 2005
Posts: 34
Likes: 0
From: Asia
Does this work with AP Engineering Power FC for FC3S?
Old 05-23-19 | 06:44 PM
  #119  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by aspec_fc
Does this work with AP Engineering Power FC for FC3S?
No... Sorry..
Old 05-23-19 | 09:10 PM
  #120  
oppa637's Avatar
Rotary Enthusiast
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,246
Likes: 6
From: Houston
Is there way to turn the app coming on at startup off?
Old 05-23-19 | 11:19 PM
  #121  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by oppa637
Is there way to turn the app coming on at startup off?
Hi
I'll release the new version soon.
Thanks .
Old 05-24-19 | 01:55 AM
  #122  
aspec_fc's Avatar
Junior Member
 
Joined: Dec 2005
Posts: 34
Likes: 0
From: Asia
Originally Posted by ds2qwd
No... Sorry..
Any chance of making it work for FC3S? I would love to have it.
Old 05-24-19 | 02:45 AM
  #123  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by aspec_fc
Any chance of making it work for FC3S? I would love to have it.
Hi
I want to check your PFC ECU model.
Please see it
https://www.rx7club.com/3rd-generati...odule-1133374/

Also let me know your email address.
My email is ds2qwd@gmail.com

Thanks.

Last edited by ds2qwd; 05-24-19 at 03:47 AM.
Old 05-28-19 | 01:56 AM
  #124  
rdgfx3's Avatar
Newbie
 
Joined: Feb 2019
Posts: 4
Likes: 0
From: Rowlett, Tx.
I just found this thread and this is awesome! I want to say Thank You to ds2qwd for taking the time and effort to bring this to us all. Well, I say all of us, but I have a 93 MR2 turbo with a power FC and unfortunately your work probably won't be compatible with my car I sure wish someone in the MR2 community could develop something like this. It won't be me, though. I sure as heck couldn't do it lol.
You RX7 guys are really innovative and seem really cool. I haven't read or seen any holier than thou attitudes, cold shoulders, flaming or price gouging in any of the posts here. When ds2qwd announced the price for his hard work, I was pleasantly stunned. Wow!
MR2 boards? Quite a bit of that crap on at least one site for sure. Maybe I should dump the 2 and get a 7?
Old 05-28-19 | 02:15 AM
  #125  
ds2qwd's Avatar
Thread Starter
Full Member
 
Joined: May 2016
Posts: 132
Likes: 45
From: seoul
Originally Posted by rdgfx3
I just found this thread and this is awesome! I want to say Thank You to ds2qwd for taking the time and effort to bring this to us all. Well, I say all of us, but I have a 93 MR2 turbo with a power FC and unfortunately your work probably won't be compatible with my car I sure wish someone in the MR2 community could develop something like this. It won't be me, though. I sure as heck couldn't do it lol.
You RX7 guys are really innovative and seem really cool. I haven't read or seen any holier than thou attitudes, cold shoulders, flaming or price gouging in any of the posts here. When ds2qwd announced the price for his hard work, I was pleasantly stunned. Wow!
MR2 boards? Quite a bit of that crap on at least one site for sure. Maybe I should dump the 2 and get a 7?
Thank you.
I think MR2 turbo is also possible.
Please let me know your ECU model name.
Also send a commander screen.
My email is ds2qwd@gmail.com




Quick Reply: Power FC I developed the Android PFC Application.



All times are GMT -5. The time now is 01:17 PM.