Power FC FC Tune preview
#127
fart on a friends head!!!
Originally Posted by FastHatch
As said before i don't release any stuff that isn't well designed and tested. It doesn't help anyone if i would now start to sell a box with bugs and hardware failures.
I need to get the PCBs (printed circuit boards) done, order the cases, get some boxes tested and then prepare everything for shipping.
Please don't forget that i am doing this currently in my vacation and i have to prepay everything.
I need to get the PCBs (printed circuit boards) done, order the cases, get some boxes tested and then prepare everything for shipping.
Please don't forget that i am doing this currently in my vacation and i have to prepay everything.
so, as far as boxes being built. is there anyway you could build a box that interfaces with the datalogit box to allow a water injection interface? having that would be AMAZING!!! as far as i know the datalogit box doesnt have that kind of capability. if you were able to make a box that would interface with it, instead of making a totally new box for us to buy, that would be awesome.
i am eagerly awaiting the release date for this software.
thanks,
paul
#128
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotorbrain
is there anyway you could build a box that interfaces with the datalogit box to allow a water injection interface? having that would be AMAZING!!! as far as i know the datalogit box doesnt have that kind of capability. if you were able to make a box that would interface with it, instead of making a totally new box for us to buy, that would be awesome.
#130
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ninjasx
Will this be compatable with the FC Commander PRO cable? I noticed it in the drop down menu for interface.
#131
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
A new version is available for download. Monitoring and the new FC Pro and FC Commander Pro file format is now supported. The calibration can also be saved in the new format.
The RB26DETT 7.03B model is now also partially supported (no monitoring yet).
http://www.fctune.com/download/FCTune_0_53.exe
It would be great if some people could try monitoring and let me know if it works.
(Just click Monitor > Monitor and Play with the Datalogit connected)
There is still a lot of work left, i guess version 1.0 will not be released before the end of the year.
Is here a designer on the board who could make me a nice splash screen?
The RB26DETT 7.03B model is now also partially supported (no monitoring yet).
http://www.fctune.com/download/FCTune_0_53.exe
It would be great if some people could try monitoring and let me know if it works.
(Just click Monitor > Monitor and Play with the Datalogit connected)
There is still a lot of work left, i guess version 1.0 will not be released before the end of the year.
Is here a designer on the board who could make me a nice splash screen?
#132
fart on a friends head!!!
Originally Posted by FastHatch
That would be a piggy-back for a piggy-back. I won't make any modifications, updates or anything else for the Datalogit box. It's not worthwhile.
would YOUR box be able to do all that then?
paul
#133
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotorbrain
thats too bad. . .
would YOUR box be able to do all that then?
paul
would YOUR box be able to do all that then?
paul
#134
fart on a friends head!!!
the rotary community is HEAVILY into them. it would benefit largely to us if the software were to allow us to TUNE the water injections on and off points. . . not necessarily tuning its ratio. . . just the on/off points.
i currently have a coolingmist kit. . . its stand alone and works out VERY well. . . exactly the way id like the powerfc to control it. . . the only reason i ask for it is because itd be A LOT simpler of an installation if we could simply run a wire or two into the box. let fctune tell the solenoids when to click on and were set.
i currently have a coolingmist kit. . . its stand alone and works out VERY well. . . exactly the way id like the powerfc to control it. . . the only reason i ask for it is because itd be A LOT simpler of an installation if we could simply run a wire or two into the box. let fctune tell the solenoids when to click on and were set.
#137
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by subyfiles
Is it possible to design the box "switchable map" feature?
#139
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Amazing work, I been folowing this thread for a while, can't wait to get one, put me on your list...
You hard work is very much appreciated, if there is way I can help, hit me up...
You hard work is very much appreciated, if there is way I can help, hit me up...
#141
im seriously wanting to test your product for my
Nissan 200sx S13 CA18DET
currently using special conversion AP Engineering Power FC ECU and Commander
what other info do you need form me FASTHATCH
Nissan 200sx S13 CA18DET
currently using special conversion AP Engineering Power FC ECU and Commander
what other info do you need form me FASTHATCH
#142
CA18DET Power FC AP Engineering Special Conversion
This is info that lights up on my FC Commander when the ignition is switched on
Power FC Ver 3.13
FC Commander 2 Ver 8.13
Hope the above info helps. Please let me know what you come up with as Id like to test it out.
This is info that lights up on my FC Commander when the ignition is switched on
Power FC Ver 3.13
FC Commander 2 Ver 8.13
Hope the above info helps. Please let me know what you come up with as Id like to test it out.
#145
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fritts
Fasthatch,
Will FCTune be compatible with the upcoming Apex Commander Pro Cable? Do you know if it will have any WB02 inputs?
Will FCTune be compatible with the upcoming Apex Commander Pro Cable? Do you know if it will have any WB02 inputs?
#146
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fritts
How is the testing on the converter box going?
Originally Posted by fritts
Also how is the wideband o2 tuning part coming along?
#147
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Steve_S13
CA18DET Power FC AP Engineering Special Conversion
This is info that lights up on my FC Commander when the ignition is switched on
Power FC Ver 3.13
FC Commander 2 Ver 8.13
Hope the above info helps. Please let me know what you come up with as Id like to test it out.
This is info that lights up on my FC Commander when the ignition is switched on
Power FC Ver 3.13
FC Commander 2 Ver 8.13
Hope the above info helps. Please let me know what you come up with as Id like to test it out.
The software interface is the same as for the regular CA18DET 3.13
So yes, FC Tune will work, but FC Edit does also.