Power FC fan question....searched
07-28-05, 07:16 AM
#1
The Dude
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: Dayton,Oh
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
fan question....searched
I think the fans in my fd are set to come on at waaaaaay to high a temperature. I can't seem to find the settings on the commander though. the pfc came with my 7 so it didn't come with the manual. I did read apexi's version on the web but still couldn't find it.... so how do I change those pesky temperature settings?
07-28-05, 11:31 PM
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,902
Likes: 0
Received 119 Likes
on
69 Posts
If you car had the cooling system recall, then on the back of the ECU was a little black box. It has a wire coming off it with an insulated female spade connector, but not used.
You run this to a switch to ground. This turns the fans on just as if the car had a water temp overheat problem. If turned on for over 2 minutes before turning the engine off, the fans will stay on for 10 minutes to cool down the engine.
Search on it!
I have the DATALOGIT and my fans at 86/86/88 and I have the switch.
Still use the FMS for extra cooling if racing in the heat as it kicks up the fan speed also.
You run this to a switch to ground. This turns the fans on just as if the car had a water temp overheat problem. If turned on for over 2 minutes before turning the engine off, the fans will stay on for 10 minutes to cool down the engine.
Search on it!
I have the DATALOGIT and my fans at 86/86/88 and I have the switch.
Still use the FMS for extra cooling if racing in the heat as it kicks up the fan speed also.
Last edited by cewrx7r1; 07-28-05 at 11:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM