Power FC Check out this PowerFC hardware interface
12-10-10 | 11:13 PM
#1
Thread Starter
I win
Joined: Jun 2004
Posts: 1,875
Likes: 2
From: NJ
Check out this PowerFC hardware interface
Here's the link
http://www.worldlingo.com/SYls3jUpdI...&wl_trglang=EN
included on the site is a link to the schematics to make this hardware interface for the PFC it seems, there is also a bit of other stuff on the site. Seems to be very interesting. I figured there must be a way to build a device to communicate with the PFC and use any type of software out there to tune it.
What do you guys think of this. Are those schematics really showing how he built the device in order to communicate with the pfc so he could tune it?
http://www.kaele.com/~kashima/car/pf...CAdapter10.pdf
http://www.worldlingo.com/SYls3jUpdI...&wl_trglang=EN
included on the site is a link to the schematics to make this hardware interface for the PFC it seems, there is also a bit of other stuff on the site. Seems to be very interesting. I figured there must be a way to build a device to communicate with the PFC and use any type of software out there to tune it.
What do you guys think of this. Are those schematics really showing how he built the device in order to communicate with the pfc so he could tune it?
http://www.kaele.com/~kashima/car/pf...CAdapter10.pdf
12-12-10 | 10:49 PM
#2
Boost Addict
iTrader: (3)
Joined: Nov 2001
Posts: 1,898
Likes: 13
From: Metairie, LA near new orleans
this was back before the datalogit beige and black box became the new way to interface to the PFC. Search around for kashi box and you'll should find some info about this. IIRC the datalogit has more inputs. Those parts cost as well as getting it assembled.
Thread
Thread Starter
Forum
Replies
Last Post
