Power FC Check out my HIGH BOOST map.
#26
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pluto
Check the range on it. That map looks like it would only goto around 1.5bar. I stop maxing out the range to 30psi a long time ago so I have no idea where you got that map from. P14 should be around 10psi or 0.7kg/cm2 if it came from someone that I tuned recently.
This is the thread where I got your maps. https://www.rx7club.com/showthread.p...6&page=6&pp=15
Still working on getting you out to STL. ps. The "New" PENTHOUSE Gentlemens Club just opened.
Last edited by LUPE; 07-16-05 at 08:29 PM.
#27
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
I think the range only goes up to 1.3kg/cm2 in that map. You should be fine but won't go any higher than that, if you want to go 30psi, the map has to be re-range to fit your needs. The 3 bar map sensor is only there to provide better accuracy for the boost level he was running (no more than 18psi).
Originally Posted by LUPE
Steve, im a little confused? Is the range you are talking about the boost range? Does this map seem like its good for 1.5 bar only?
This is the thread where I got your maps. https://www.rx7club.com/showthread.p...6&page=6&pp=15
Still working on getting you out to STL. ps. The "New" PENTHOUSE Gentlemens Club just opened.
This is the thread where I got your maps. https://www.rx7club.com/showthread.p...6&page=6&pp=15
Still working on getting you out to STL. ps. The "New" PENTHOUSE Gentlemens Club just opened.
#28
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pluto
I think the range only goes up to 1.3kg/cm2 in that map. You should be fine but won't go any higher than that, if you want to go 30psi, the map has to be re-range to fit your needs. The 3 bar map sensor is only there to provide better accuracy for the boost level he was running (no more than 18psi).
Before installing your maps, my afr's were in the mid to low 10's. Now that I've loaded up your timing maps, my afr's have leaned out quit a bit ( 11.5-11.8 range ). I've noticed quite an increase in torque and hp too. This is just seat of the pants but it might just because I've been drinking alot lately.
Anyhow, you the man....
Last edited by LUPE; 07-17-05 at 10:29 PM.
#29
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
We're going to take out thursday and tune it....... I pulled my 5 year old filter off the other day and it was completely clogged with what looked like mud. I guess 5 years of oil dirt snow/water will do that to it. I don't run fender liners so everything gets thrown right onto it. I changed out the filter before my last post and I think that's why I was boosting more than usuall and I think that's why I was running so much leaner.
Anyhow, we're going to tune it and race this weekend.......
Anyhow, we're going to tune it and race this weekend.......
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
jetlude
Single Turbo RX-7's
4
08-18-15 04:53 PM