I have the Aquamist 2s kit. Dave from KDR was able to install it. He was not able to program it as his dyno broke. I have discovered that it is too difficult for me to figure out how to program it. I'm thinking of downgrading the kit to a 2d kit. I was wondering if it will work with the Power FC and Datalogit.

Here is a reference on the Aquamist site:

http://www.aquamist.co.uk/sl/plist/p...9/806-009.html

Thanks for any feedback.

Ken

 

Here's an FD in New Zealand that has the kit. He is using a Knightsports ECU from Japan on his.

http://www.aquamist.co.uk/rescr/gallery/vyv/vyv.html

 

I am looking at getting an Aquamist. It looks/sounds like you should be able to just plug in the 2d, set the ratio you want, and you are fine.

So, it sounds like you need the Fuel Injection Amplifier 2, 806-441.

Is there noone on the DataLogit list who has done this? With the popularity of WI with Aussies, I would expect you to be able to find someone....

 

By the way, how did you order your Aquamist?

 

I bought the 2s kit originally. Dave from KDR installed it. He also installed my fuel cell for the water in the trunk. He had to fabricate a bracket for it. He charged me 7 hours labor. I don't know what was for the water and what was for the custom bracket. The 2s kit is very complex and the 2d is easier install. Dave was not able to program the 2s kit as his dyno broke. I decided I'm not technically able to program it either. I'm switching to the 2d kit. Brad from KCSAAB is getting me the extra parts I need. He can give you a price and he knows his stuff. My guess is the 2s kit is about $935 and the 2d kit is about $750. If interested in pics give me your e-mail address and I'll send you some.

Brad is on the Aquamist web site. brad@kcsaab.com

Ken