Power FC 850cc and 1600cc pfc adustments
#1
Bang Bang!
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Boston
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
850cc and 1600cc pfc adustments
i just finished upgrading my friends fuel system with 850cc and 1600cc injectors with kg rails fpr and resistors. now i just need some info on setting them on the pfc so i can get the car to idle better. it idle rough and the wideband reads 10.5:1
ony info would be great just need to get it running a lil better so we can head to a dyno shop... thanks
this is a single turbo fd.
ony info would be great just need to get it running a lil better so we can head to a dyno shop... thanks
this is a single turbo fd.
#3
RX-7 Bad Ass
iTrader: (55)
Hit up the PFC forum, 850 primaries has been covered ad infinitum. Also, if you don't have Chuck Westbrook's tuning notes, you need to get those as well.
Dale
Dale
#6
Bang Bang!
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Boston
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
so i got som pim volts reading from some one on here with similar setup and now my car runs reall good.
but now my crank sensors dont read they stay stuck on 5 degrees and 10 degrees and sounds like car is misfiring my a/f idle was 11.1:1 now its at 13.8:1 and idles at 600rpms and sounds like its misfiring....
but now my crank sensors dont read they stay stuck on 5 degrees and 10 degrees and sounds like car is misfiring my a/f idle was 11.1:1 now its at 13.8:1 and idles at 600rpms and sounds like its misfiring....
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM