nanaimorotard

how the hell do i get that huge bolt off the back of the engine?? thanks anyone.
its a 13b from a 85 gsl se

Siraniko

iTrader: (13)

flywheel socket of course.

Jaime Enriquez

2 1/8" craftsman socket. Its a big *****....and most shops won't have it. Best to go to Sears and buy yer own. OSH may have 'em also....but since you be above the 49th parallel...I would check at your local big name tool supply house.

teddyrx2

iTrader: (33)

+1 go to sears and get the socked and the breaker bar also a flyweel holder so the flywheel don't turn and a long flat bar with pre drilled holes to bolt to the flywheel to keep the motor flat and steady on it's stomach

trochoid

iTrader: (6)

I've never had a problem breaking the flywheel nut loose with a 1/2" impact. I've had more trouble breaking the e-shaft bolt loose with the permanent Locktite that the factory uses, even though it's only torqued to 90 lb/ft.

nanaimorotard

she ran then blew. now rebuild and a side draft