Beginning 1967 110S Restoration Project
09-15-08, 12:42 PM
#228
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
I saw one of these about ~15 years ago. I don't remember who owned it or any of the back story, It was at a car show and what I do remember, is that it was all original except the engine and trans. The owner mentioned that he still had the original engine and trans, still running when pulled (with very low mileage) and presumably never rebuilt.
He put in a carb'd 4 port 13B built with mostly new components and an RX? 5 speed trans without modifying any of the original components because he wanted to drive it on a regular basis and have it be reliable, without racking up mileage on the oem drive train.
He put in a carb'd 4 port 13B built with mostly new components and an RX? 5 speed trans without modifying any of the original components because he wanted to drive it on a regular basis and have it be reliable, without racking up mileage on the oem drive train.
09-15-08, 12:54 PM
#229
I gotta say, I think it's absolutely an amazing feat simply to find parts for a car that is 41 years old. I have trouble finding parts for a car that is half that age with much higher production numbers!
The time spent finding bolts, screws, little NOS items that you didn't have must be equal to the time spent building the car.
The time spent finding bolts, screws, little NOS items that you didn't have must be equal to the time spent building the car.
09-16-08, 02:03 PM
#230
I gotta say, I think it's absolutely an amazing feat simply to find parts for a car that is 41 years old. I have trouble finding parts for a car that is half that age with much higher production numbers!
The time spent finding bolts, screws, little NOS items that you didn't have must be equal to the time spent building the car.
The time spent finding bolts, screws, little NOS items that you didn't have must be equal to the time spent building the car.
09-16-08, 02:51 PM
#231
Senior Member
09-16-08, 05:54 PM
#232
Rubber trunk seal and I think he mentioned a few items for the heater core, but don't quote me on that.....
Bottom line is that he's been able to find and/or refurb almost all of the parts, but a few have been a challenge.
Bottom line is that he's been able to find and/or refurb almost all of the parts, but a few have been a challenge.
09-16-08, 10:48 PM
#233
Oh yea, also forgot to mention.... Glenn told me that the brake lines, fuel lines, rubber grommets, and windshield and rear glass rubbers were made for this car and Jay Leno's car as none were available. Leno was happy to split the cost.
Also, the OEM wheels had to be located in Japan and were in such poor shape that the inner rims were cut out from the outer rims with the outer rims being replaced. The wheels that came on the car when Glenn purchased her were mags and not original.
Also, the OEM wheels had to be located in Japan and were in such poor shape that the inner rims were cut out from the outer rims with the outer rims being replaced. The wheels that came on the car when Glenn purchased her were mags and not original.
09-21-08, 11:52 AM
#235
Sunday images everyone.... enjoy. Glenn will be packing her up and heading to Sevenstock this Friday morning. Hopefully we'll get a few more progress pics before then...
Todays pics... engine is now dressed with wiring and plug wires.
Todays pics... engine is now dressed with wiring and plug wires.
09-24-08, 09:51 PM
#239
Here's pics from today. Note the addition of the upper radiator hose, steering wheel refurbished, wheels on (sans hubcaps), front valence and a few other things I'm sure that I've missed. I think this will be about it as Glenn will load her up along with the R360 tomorrow in preparation for his Friday drive over to LA for SSXI.
10-05-08, 11:03 AM
#246
Senior Member
WOW did Glenn make the m logo and the yellow and silver sticker, or were they part of the parts that he has. if he had them remaid, how cause my RX2s air cleaner has them, but the cleaner needs a bit of paint in some areas but im scared that i may damage the stickers on it.
the work that Glenn is puting in this car is incredible.
the work that Glenn is puting in this car is incredible.
10-05-08, 09:22 PM
#247
WOW did Glenn make the m logo and the yellow and silver sticker, or were they part of the parts that he has. if he had them remaid, how cause my RX2s air cleaner has them, but the cleaner needs a bit of paint in some areas but im scared that i may damage the stickers on it.
the work that Glenn is puting in this car is incredible.
the work that Glenn is puting in this car is incredible.
10-09-08, 10:10 PM
#249
Full Member
Join Date: Feb 2008
Location: Melbourne Australia
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
WOW did Glenn make the m logo and the yellow and silver sticker, or were they part of the parts that he has. if he had them remaid, how cause my RX2s air cleaner has them, but the cleaner needs a bit of paint in some areas but im scared that i may damage the stickers on it.
the work that Glenn is puting in this car is incredible.
the work that Glenn is puting in this car is incredible.
RX2 fan there is a guy here in Australia that does reproduction decals etc... He is the guy to talk to if you are looking for similar stickers...
Link to his thread on ausrotary.com
http://www.ausrotary.com/viewtopic.php?f=48&t=147072
Mo Melville
10-14-08, 05:50 PM
#250
Banned. I got OWNED!!!
Join Date: Oct 2008
Location: japan
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
sounds great
hello from japan.
i have an rx-4 automatic coupe.
how hard is it to fit a series 4/5 13b turbo, series6 twin turbo setup, or a 20b twin turbo in a rx-4 automatic coupe? ill want a 5 speed gearbox. whats easiest and most simplest to do?
thanks for your help!
i have an rx-4 automatic coupe.
how hard is it to fit a series 4/5 13b turbo, series6 twin turbo setup, or a 20b twin turbo in a rx-4 automatic coupe? ill want a 5 speed gearbox. whats easiest and most simplest to do?
thanks for your help!