Old School and Other Rotary Old School and Other Rotary Powered Vehicles including performance modifications and technical support

20b. Help!

Thread Tools
 
Search this Thread
 
Old 03-05-05 | 02:59 AM
  #1  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
20b. Help!

Hello. Prompt where to take Repair Manual 20B? I from Russia. How many Nm to twist flywheel locknut on the eccentric shaft? Also as well as 13B? How many to compress (tighten) tension bolt?
Old 03-20-05 | 06:40 PM
  #2  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
Help me!
Old 03-21-05 | 01:19 AM
  #3  
kenn_chan's Avatar
Savanna Rx-7
 
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
same as 13b

it is the same as the 13brew so torque your tension bolts to 31-39 N-m or 3.2-4.0 m-kg or 23-29 ft-lb for the tension bolts,and torque the flywheel nut is 390-490N-m, or 40-50 m-kg, or 290-360 ft-lbs

kenn
Old 03-22-05 | 09:47 AM
  #4  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
But what order tension bolts? There, there is small bolts
Old 03-22-05 | 11:24 PM
  #5  
bliffle's Avatar
Rotary Freak
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
Online manual:

http://www.wankel.net/~krwright/cars/rx7/85_manual.html

I started looking around here:

http://www.wankel.net/~krwright/files/manuals/1985_RX7_FSM/85RX7(30)Technical_Data.pdf

I have a hardcopy manual for the 83 (12A)

Good luck.

B
Old 03-22-05 | 11:58 PM
  #6  
bliffle's Avatar
Rotary Freak
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
Try looking in 20B threads. Here's one:

https://www.rx7club.com/showthread.p...0b#post4160119

There's a fellow named "Jeff20B" but maybe he's on a different website. I'll look around for him.

B
Old 03-23-05 | 12:04 AM
  #7  
bliffle's Avatar
Rotary Freak
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
Try this guy:

http://www.mazdarepu.com/board/membe...erName=Jeff20B

B
Old 03-23-05 | 04:11 AM
  #8  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
many thanks
Old 03-25-05 | 01:27 PM
  #9  
Banned. I got OWNED!!!
 
Joined: Aug 2002
Posts: 257
Likes: 1
From: Stony Point NY
Damm...Russia !!!!!????
Nice to see Rotor heads from that side of the world!!!
Old 03-29-05 | 09:11 PM
  #10  
Aviator 902S's Avatar
Rotary Freak
 
Joined: Mar 2003
Posts: 1,711
Likes: 0
From: Calgary, Alberta, Canada
Originally Posted by Goopy
Damm...Russia !!!!!????
Nice to see Rotor heads from that side of the world!!!
Yeah, no kidding. Supposedly the rotaries used in some cars built in Russia are a carbon copy of Mazda's 13B except with no "Mazda" logos cast into the housings. Caesar, can you verify this and if so, are any of the parts interchangeable? We can always use a new source of affordable rotor housings.

Last edited by Aviator 902S; 03-29-05 at 09:13 PM.
Old 03-30-05 | 02:16 AM
  #11  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
Please write the simple word. I bad understand you.
Old 03-30-05 | 04:11 AM
  #12  
mortenf's Avatar
506 RWHP 12A..

 
Joined: May 2004
Posts: 485
Likes: 3
From: Norway
I think i have heard about LADA using 13B, supposedly a Mazda knock off. Actually i know that Lada has tried out rotaries, i will have to check when i have some time..


CESAR, Did Lada make a wankel engine like Mazda?

Better yet, i will ask you in Russian! (not good but i hope you understand)

Вы когда-либо слышали о lada, делающем wankel? (13B?)

Last edited by mortenf; 03-30-05 at 04:18 AM.
Old 03-31-05 | 02:41 AM
  #13  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
LADA (VAZ) does rotory engine RPD-415 Analogue 13B was RPD-413, and 12A was RPD-411. Covering rotor housing NiCSi, APEX SEAL from ceramics. My WEB-page: www.streetraces.narod.ru
Old 03-31-05 | 03:53 AM
  #14  
mortenf's Avatar
506 RWHP 12A..

 
Joined: May 2004
Posts: 485
Likes: 3
From: Norway
Hope you understand this..

Вы можете использовать lada wankel с mazda частями?
Old 03-31-05 | 04:47 AM
  #15  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
Originally Posted by mortenf
Hope you understand this..

Вы можете использовать lada wankel с mazda частями?
Yes. Beside I cost(stand) plenty of details from Mazda. It is impossible only top of the apex seal - quickly wipe.
Old 03-31-05 | 05:02 AM
  #16  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
http://photofile.ru/default/do?id=7365808


Analogue 20B, but peripheral port
Old 03-31-05 | 05:03 AM
  #17  
CAESAR's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2005
Posts: 13
Likes: 0
From: Russia, Moscow
http://photofile.ru/default/do?id=7365802#sm

rotory engine VAZ RPD-415
Old 03-31-05 | 08:28 AM
  #18  
mortenf's Avatar
506 RWHP 12A..

 
Joined: May 2004
Posts: 485
Likes: 3
From: Norway
Thank you very much!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mazda84GSLSE
Introduce yourself
13
04-27-18 07:35 PM
James Knox
Introduce yourself
5
10-22-15 05:08 PM



Quick Reply: 20b. Help!



All times are GMT -5. The time now is 03:09 PM.