any mechanics near yakima?
#1
Touging anyone
Thread Starter
Join Date: Sep 2007
Location: Yakima
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
any mechanics near yakima?
Im looking for a mechanic just moved back home and I possibly blew the 7's engine. Any ways what ever happened it needs to be fixed. i miss driving it. Hit me up and we will figure out the details.
#5
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
I can fix anything you got bud. We have a yakima rx7 club. You should join. PM me and I will come look at your car! I am from yakima also!
What cha got? second gen? turbo?
What cha got? second gen? turbo?
#6
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
also mechanics in yakima are NOT going to know much (read ANYTHING) about your car. All the ones I have even shown it to act like they know, and drop the normal words, (aka apex, blown, bad) but they really have no clue. I do NOT recommend you EVER take your 7 to a mechanic or even the mazda dealership. There is almost nothing you can't fix yourself for much cheaper.
#7
Unregistered User
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: Dec 2003
Location: Washington State
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
The dealership in Yakima had my car for 2 weeks before they said sorry take it to Seattle. Autometrics fixed it in 1 day for a hefty price but its been good since then, 5yrs. I killed it at an autocross, but now they wont work on it anymore. You might have to learn about your car like I and maybe most of us did, by trail and error.
Your in west valley? +1 on the club www.cwrotary.net
Your in west valley? +1 on the club www.cwrotary.net
Trending Topics
#8
Sounds like you got a nice support group. I grew up in Yakima and now live in Spokane. My dad has a nice spread out in West Valley off of Autanum. When the car is mobil, we'll have to meet up. I come back every 2-3 months to visit with the fam and friends still. Good luck man!
#11
Touging anyone
Thread Starter
Join Date: Sep 2007
Location: Yakima
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
my ****
this is what i got....
1988 turbo 2 mazda rx-7, with 2500 miles on a fully rebuilt mild street port engine, rotor housings, 3mm seals, oil seals the works i have the reciept from Mt. Peak automotive, perfect compression very strong motor. there are alot of modifications on this car which includes,
stage 3 clutch and throw out bearing started going out,
performance ECU,
ported wasegate,
series 5 turbo,
80mm thunder fabrications down pipe and mid pipe,
duel apex n1 Apexi catback exhaust,
2.5" TID and cone filter,
custom fitted 23in front mount intercooler,
new turbo XS blow off valve,
Turbo XS MBC,
TB-mod with knife edge porting,
2571 engeneering block off plates,
new walbro 255 LPH fuel pump,
New 680cc secoundary injectors,
PD-elimination mod.,
Koyo radiator,
lowering springs(brand unknown),
new race cold air intake,
TSW 18's 9.5 in the rear on 255's, and 8.5 in the front on 235's,
series 5 front end,
series 5 round tail lights,
aftermarket water guage, turbo guage, air/fuel ratio, and oil pressure,
white LED lights under car,
front and back strut bars,
slotted brakes all around
power akoustics 3.6 in. DVD/CD player and the works,
boston acoustics speakers all around recently purchashed (reciept),
custom white tach guages,
and giant RPM tach
1988 turbo 2 mazda rx-7, with 2500 miles on a fully rebuilt mild street port engine, rotor housings, 3mm seals, oil seals the works i have the reciept from Mt. Peak automotive, perfect compression very strong motor. there are alot of modifications on this car which includes,
stage 3 clutch and throw out bearing started going out,
performance ECU,
ported wasegate,
series 5 turbo,
80mm thunder fabrications down pipe and mid pipe,
duel apex n1 Apexi catback exhaust,
2.5" TID and cone filter,
custom fitted 23in front mount intercooler,
new turbo XS blow off valve,
Turbo XS MBC,
TB-mod with knife edge porting,
2571 engeneering block off plates,
new walbro 255 LPH fuel pump,
New 680cc secoundary injectors,
PD-elimination mod.,
Koyo radiator,
lowering springs(brand unknown),
new race cold air intake,
TSW 18's 9.5 in the rear on 255's, and 8.5 in the front on 235's,
series 5 front end,
series 5 round tail lights,
aftermarket water guage, turbo guage, air/fuel ratio, and oil pressure,
white LED lights under car,
front and back strut bars,
slotted brakes all around
power akoustics 3.6 in. DVD/CD player and the works,
boston acoustics speakers all around recently purchashed (reciept),
custom white tach guages,
and giant RPM tach
#12
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
um ... k? and ? ...
u get -1 for the LEDs, -2 for giant RPM tach, -1 new "race" cold air intake, lol, and pretty sad car audio....
what is this performance ECU? Who did it? Rtec? Running stock boost?
interesting car.... Be careful your getting really close to rice.
u get -1 for the LEDs, -2 for giant RPM tach, -1 new "race" cold air intake, lol, and pretty sad car audio....
what is this performance ECU? Who did it? Rtec? Running stock boost?
interesting car.... Be careful your getting really close to rice.
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
#13
Touging anyone
Thread Starter
Join Date: Sep 2007
Location: Yakima
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
re:
iam running stock boost, but it exceeds 10 psi after 4200 rpms, it climbs all the way to 20psi and Im a dumb *** by taking it to 20 psi but I did. and you made a comment about my audio that list is about my car a couple of months ago that I had saved, and copy pasted. I bought the boston acoustics to get a clear crisp sound which It does nicely to go with my 2000 watt 12in mb quart subs. there is also some blow by theres fuel in my oil.
#14
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
iam running stock boost, but it exceeds 10 psi after 4200 rpms, it climbs all the way to 20psi and Im a dumb *** by taking it to 20 psi but I did. and you made a comment about my audio that list is about my car a couple of months ago that I had saved, and copy pasted. I bought the boston acoustics to get a clear crisp sound which It does nicely to go with my 2000 watt 12in mb quart subs. there is also some blow by theres fuel in my oil.
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
HAHAHA
Sorry for sounding like an ***, but you need to research A LOT before you turn on your 7 again.
#15
If you are boosting to 20 without adequate fuel management and hit 20 lbs, you are more than likely in for a rebuild + hard parts.
Have you done a compression check? That is the first place to start, and if that is bad, there is nothing to do other than pull the motor and replace/rebuild it.
There isnt much on these cars that is too hard to do yourself, and even doing part of it will save some green..
(tweaks- stop being obnoxious......lol)
#17
The Outsider
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Jul 2003
Location: Deep in 6th
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
If you hit 20 psi, you surely dont have a ported wastegate. A mild port will limit you to under a bar, unless your driving up a three mile long hill with your foot planted. Also, do you have a fuel cut defender. ?
#18
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
(tweaks- stop being obnoxious......lol)
Anyways compression test it, figure out how blown it is, front or rear ( or both) and then you can either give the engine off to someone that can tear it apart and check to see what you need replaced, or send it off to get a complete rebuild for a lot more. It is quite easy to take the engine apart, and if you take some pictures and get some tools we can guide you through the process of what will need to be replaced. Prepare to spend at LEAST 800$ on rebuild parts if you blew an apex, but more realistically in the 1000$ range. You will most likely need (unless you are the most lucky rotor head on earth) 3 new apex seals (if not all 6) 220$ish a new housing 200$ if you can find it used, 450$ new, new rotor 150-350 used (you don’t want to even know used), new coolant seals and such 185$ from pineapple, and while you’re in there I would either get a port (300ish)(or free yourself), and replace a lot of the springs with 3rd gen. (such as the corner seals, side seal, and apex seal springs.) They are MUCH MUCH better. Most the time the side seals are fine even on blown engines, just the springs have collapsed or became fatigued from high heat cycles.
Anyways, I just want to know... what made you think 10 psi was ok to do, let alone 20???
(oh and I just read that you had your engine rebuilt 2500 miles ago..... and ported so you most likely won’t need to do that again unless the apex F'ed up your plates.) To bad you abused your engine, or else you could have most likely had them rebuild it for pretty cheap. But then again if you wouldn’t have abused it to begin with it wouldn’t have been blown. O.o hehe.
3mm apex seals are a waste of money, and you will either now have to replace your rotors with some that have already been milled out for 3mm, or have one rotor 2mm and one 3mm hehe.
What are you doing with this car? Why did you go 3mm? ALSO I do not think that 2,500 miles is even close to enough break in period for it to be pounded on...
anyways.... yeah that's what you have to deal with right now.
BE MORE NICE TO YOUR 7!
#19
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
He had to have had a FCD (or it was build into his modified/performance ECU), or else it would have done fuel cut after about 8psi. The SCARY thing is that even if he did have the FCD, the ecu doesnt know what to do with timing after 8ish psi. It just stays the same, at 10, 14, or 20 psi. O.o He turned his turbo into a huge blow dryer. This whole thread makes me dizzy. 20 psi on an allegedly ported wastegate stock s5 turbo makes me cringe. I feel as though he has been either taken advantage of, or has been getting some VERY bad advice from piston friends. :P
#22
Touging anyone
Thread Starter
Join Date: Sep 2007
Location: Yakima
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
well my car will finally be coming home today its been in enumclaw at my uncles, im excited i have missed her. anyways so if you can help contact me through my email im still fairly knew to the club and cant PM people yet, my email is driftn7@yahoo.com. Again im in Yakima! thx much guys.
#23
Full Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: May 2005
Location: washington
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
i know that most people preach not to take their 7 to a mazda shop but i brought my 93 to the dealership in yakima after picking the mechanics brain for a few weeks to make sure he knew what he was doing. his name is ***** and he is a smart dude. he is 23 and has been a certified rotary mechanic since he was 17. when i got my car it had a engine fire and i ended up geting a remain. the shop took well care of me and he did a great job. he has owned 7's in the past and is an avid tunner. also a big plus is that he loves the cars and most of all loves to work on them. before i took my car to him i checked on his rep and was told nothing but good thins. that is just my experience
#24
FD pro licensed driver
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (3)
Join Date: Feb 2006
Location: Renton/Bellevue/Seattle WA
Posts: 2,897
Likes: 0
Received 2 Likes
on
2 Posts
awww your THAT guy ... haha I have heard about you quite a bit. I actually was in the yakima mazda parts place ordering some parts I needed ASAP, and I was like WHO'S 3rd gen is that?! The parts woman was like ... "third gen?" all I know is its getting a new engine. ... haha
I think I even called Natural smooth and was like, I spotted a 3rd gen! haha
I think I even called Natural smooth and was like, I spotted a 3rd gen! haha
#25
Full Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: May 2005
Location: washington
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
do you think that a woman that works in the parts department would actually know what third gen means. she looks at a computer all day. now say that to a mechanic and i think you would get a different answer. i hope... i know ***** did. anyway, im happy with the job he did, its clean and due to the engine fire he had a mess to go through. the car runs great.