New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Stalls after warmed up

Thread Tools
 
Search this Thread
 
Old 05-06-12 | 09:26 PM
  #1  
DuctTapeConvertible's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 8
Likes: 0
From: Washington
Stalls after warmed up

So I know I have an exhaust leak and I need a coolant flush and an o2 sensor, but my car begins to idle weird when it warms up then stalls. It sounds like the car is revving then stopping and it does that about three times then the car shuts off. Could the three problems listed above be the cause?
Old 05-06-12 | 10:36 PM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up

iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
None of the things you mentioned could cause idle problems.

Idle problems are generally due to vacuum leaks or TPS problems.
Old 05-07-12 | 12:41 AM
  #3  
DuctTapeConvertible's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 8
Likes: 0
From: Washington
Ah I see I will have to bring it in and have them check for leaks, thanks.
Old 05-08-12 | 03:25 PM
  #4  
SAT_Leo814's Avatar
Can Post Only in New Member Section
 
Joined: May 2012
Posts: 4
Likes: 1
From: Florida
Yeah i have the same problem , when i start it, it revs to 3rpms then it starts to idle at 800rpms , but when i rev it to 3rpms and let go of the throttle my rpm gauge drops and the cars shuts off , any ideas? its my first car/rotary xD fc 1987 rx7
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
Einheri
Single Turbo RX-7's
14
10-07-15 12:23 PM
93FD510
New Member RX-7 Technical
2
10-01-15 02:00 PM
Rotafuzz
New Member RX-7 Technical
3
09-30-15 09:55 AM
dexter snoek
New Member RX-7 Technical
4
09-29-15 09:18 AM



Quick Reply: Stalls after warmed up



All times are GMT -5. The time now is 08:21 AM.