New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

rx 7 no starr help

Thread Tools
 
Search this Thread
 
Old 01-25-11, 06:52 PM
  #1  
Junior Member
Thread Starter
 
Danny1025's Avatar
 
Join Date: Jan 2011
Location: Puerto Rico
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Question rx 7 no starr help

Hi i resently bought a 1988 rx 7 and the headlights didnt work so i tried the fuse box but the fuse cover was not there so i went online but i didnt find anything useful so i kinda rearange the fuses and and the head lights are working but the car does not start so if anyone can send me a pic or a adress to site were i can find the fuse layout it will be helpfull or any other thing that could be a proble that i should take a look at thanks
Old 01-25-11, 08:04 PM
  #2  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
Mid-way down the page in the FAQ: https://www.rx7club.com/showthread.p...72#post5131072

The 15A engine fuse is critical to starting.
Old 01-26-11, 10:09 AM
  #3  
Junior Member
Thread Starter
 
Danny1025's Avatar
 
Join Date: Jan 2011
Location: Puerto Rico
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Question

Yep that was the one thanx for ure help and if you can can u tell how many quarts of oil does my 1988 take
Old 01-26-11, 10:18 AM
  #4  
Retired Moderator, RIP

iTrader: (142)
 
misterstyx69's Avatar
 
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes on 114 Posts
drain the oil,replace the filter and start off with 4 quarts.
The system I believe holds 6 but there is always residual oil in the cooler.So Unless you drain the cooler you will have less oil that comes out when you change it.(roughly 4 quarts).
Now,you should start reading the ARCHIVES,and also the FAQ's as it has a lot of the usual questions that Newbies are going to ask,
help yourself,and get acquainted with your car.Cheers Styx!~
Old 01-27-11, 03:42 PM
  #5  
Junior Member
Thread Starter
 
Danny1025's Avatar
 
Join Date: Jan 2011
Location: Puerto Rico
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
water pump

I got my 88 and i replaced my water pump because i thought it was leaking but wen i put evetything back again it was leaking but behind the alternator wath should i use there silicone or buy a gasket for it
Old 01-27-11, 04:26 PM
  #6  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
A gasket would be best, but RTV would work if you can't get a hold of one.
Old 01-28-11, 10:52 AM
  #7  
Junior Member
Thread Starter
 
Danny1025's Avatar
 
Join Date: Jan 2011
Location: Puerto Rico
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
question

I replaced all the belts alt p/s etc and i put back everything exept the air pump and now the car doesent want to start and i put fuel in it so u git any ideas what can i look for or do
Old 01-28-11, 11:33 AM
  #8  
Junior Member
Thread Starter
 
Danny1025's Avatar
 
Join Date: Jan 2011
Location: Puerto Rico
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
question

My car i started it and it was like failing and hesitating so i left it runing for a while and then i took it for a ride and it dindt want to go farther than 4000 rpm and then it died and i tried starting it again but it didnt start and there was alot of white smoke




All times are GMT -5. The time now is 12:40 PM.