problem start new engine!!!
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Denver, Co
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
problem start new engine!!!
im just replace my 93 FD with a used engine!! and some how i can get it to start it run if i spraying the start liquid to the intake!! and when i pull the injector out seem like they spraying lot of gaS!! you guy have any idea!! what wrong with it and how can i get it to started!!
#2
Moderator
iTrader: (7)
If you can see the spray pattern is not good when the injectors are off the block, I'd send all four injectors out for ultrasonic cleaning and flow testing. Witchhunter Performance, RC Engineering, and Marren Fuel Injection all do an excellent job with FD injectors.
Poorly spraying injectors are not just annoying - if they clog and run lean they can blow your engine.
Are these the injectors that came with the used engine?
Dave
Poorly spraying injectors are not just annoying - if they clog and run lean they can blow your engine.
Are these the injectors that came with the used engine?
Dave
#3
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Denver, Co
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
are they expensive to be clean out!!!
yes this injector is coming with the engine i just bought!!! ill probably think they got clog or somehow!!! i have a set of 1600cc n 1200cc!! should i put them on now to start the engine with! or should i wait and use the stock injector to start the engine first!!! because im going for big single turbo set up!!
yes this injector is coming with the engine i just bought!!! ill probably think they got clog or somehow!!! i have a set of 1600cc n 1200cc!! should i put them on now to start the engine with! or should i wait and use the stock injector to start the engine first!!! because im going for big single turbo set up!!
#4
Moderator
iTrader: (7)
1600s and 1200s are used as secondary injectors, which are not active when starting the engine.
I think Witchhunter charged $15-20 / ea. It's a very important maintenance item IMHO that should be done every few years or any time the vehicle has not been run for a very long time. Especially since you're planning to build and get tuned, it's important to know all the injectors are firing exactly 100% of their rating.
Dave
I think Witchhunter charged $15-20 / ea. It's a very important maintenance item IMHO that should be done every few years or any time the vehicle has not been run for a very long time. Especially since you're planning to build and get tuned, it's important to know all the injectors are firing exactly 100% of their rating.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM