no acceleration at low rpm
#1
Newbie
Thread Starter
Join Date: Apr 2007
Location: ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
no acceleration at low rpm
1985 GSL 12a stock When trying to accelerate from dead stop, must rev to 4500 or more and slip clutch to get car to move without stalling ,once car is moving it accelerates strongly and smoothly. Same thing in each gear...below about 2500 rpm the more throtle you give the more it loses rpm, and wants to die. Once you get above 2500-3000 rpm it smooths out and runs strong. Idle is O.K. I'm thinking vacuum problem. No apparent pin holes or cracks in vac hoses. Car did sit in storage for a number of years. All fuel filters and filter screens cleaned or replaced. Lots of Lucas fuel line\injector cleaner ran thru. Any ideas about how to track down problem? Thanks
#6
Lives on the Forum
Did this happen all at once, or slowly get worse over time? Sounds to me like you've got a clogged jet in the primaries. Time to do some reading, here is a site put together by our resident carb expert; www.sterlingmetalworks.com You can find lots of instruction on rebuilding, troubleshooting, and tuning the stock Nikki carb.
Good luck...
.
Good luck...
.
#7
Newbie
Thread Starter
Join Date: Apr 2007
Location: ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
loww rpm trouble
The car sat for many years with old gas in it. I just aquired it aND AM TRYING TO MAKE IT ALL BETTER. tHANKS FOR WEB-SITE. lOT'S OF INFO TO SIFT THRU
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM