Lemonoh

I just finished a rebuild on a 94 rx7. After about 650miles I had a small fuel leak and head to remove everything down to the injectors. Now that its back together it idles fine and the leak is stopped but when I touch the gas is bogs down for a second then rev's to 3k and then back to idle. According to the Power FC as soon as it starts to jump the fuel cuts completely. Considering I had the rats nest off to fix the leak its most likely a line on wrong or mabey the plug wires mixed up. I'm gonna pull it apart again tomorrow but i was wondering if anyone may have an idea where to look and save a bit of time.
Thanks