2fc

Heres the story....
got the 93 fd a few weeks ago, did the oil change, plugs wires, the whole tune up, shibang. car ran amazing until today when i pulled into a car wash to wash it myself and the wheel had apparently been rubbing the main chassis harness for awhile(didnt think to check that) and when i turned to the right to turn in it finished off the harness by chewing the insulation off most of the wires. I pulled the looming back fixed all wires(the right way), and it will crank for days but no start. THE FUEL PUMP IS RUNNING, but i have no spark and i have no fuel smell so i would assume injectors arent opening. I dont think my cas is getting power and my ignitor is getting power. IM at a loss and have no idea wat else to check. anybody know what it could be? checked the relays circuit relay and egi main relay and im pretty sure theyre good. both click when key is turned on. No cel either.

Pestilent

iTrader: (1)

Seeing as how you exposed the wires, if even for a short time, I would be checking continuity in everything. You may have burned up a wire by shorting it.

2fc

i checked every wire possible today took about 6 hours. I pulled the case off the ecu today and found a burnt capacitor. I'm pretty sure thats my issue. I am trying my buddy's ecu this weekend to see if it works. Thanks for the response. ill keep updated.

Pestilent

iTrader: (1)

No problem, post your results too.

DavebRN

Was it just the cap ?

2fc

I havent gotten a chance to try it yet. my buddy said he was gonna stop by today but havent heard from him yet. I will update as soon as i know.

2fc

I replaced the ecu and it started ran rough for a minute and smoked. but let it warm up and run it runs amazing now. If you have this problem i encourage you guys to check the ecu first.

Sgtblue

iTrader: (16)

I have a 5 spd non-cali ECU. If your interested just PM me.

KaoticFdR1

glad it worked for you....i still need to swing by to pick up the $$ lol