hi there, i have an 88 s4 and a 89 s5, both alarm modules were carelessly yanked out and i have clicking non starting issue, does anyone have a wiring diagram to redo the ignition wiring from scratch without the alarms please and thank u, and if so thank u for your time.

 

On the S4 you start by locating the Starter Cut relay that is found near the Main Relay, which is near the trailing coil. The Main Relay has two plugs but the Starter Cut Relay has only one plug, featuring four wires. The alarm prevents the car from being started by interrupting a signal at this relay. To bypass it you jumper the Black/White wire to the Black/Green wire which does not have voltage w/key to on ( as there are two B/G wires, one w/voltage w/key to on and the other has voltage w/key to start and this is the wire you want to use in jumpering).

On the S5 you locate the Starter Cut Relay once again and jumper the Black/Blue wire in the relay to the Black/Green wire which "does not" have voltage w/key to on.