New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

87 FC Passenger Door Won't Open

Thread Tools
 
Search this Thread
 
Old 12-06-08, 08:31 PM
  #1  
Newbie
Thread Starter
 
Hashiba's Avatar
 
Join Date: Dec 2008
Location: British Columbia
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
BC 87 FC Passenger Door Won't Open

Ok, so I've searched, lurked, googled and fiddled, but alas: My passenger door is stuck closed.

I've managed to get it to open again, but upon locking the door one day it was back to plain old non-functional. I'm a little irritated, but I figure there must be someone smarter than me with some insight as to how I should fix this.

Any advice will me much appreciated.
Old 12-07-08, 10:34 AM
  #2  
Ricer

iTrader: (4)
 
IanS's Avatar
 
Join Date: Jun 2004
Location: Washington, Iowa
Posts: 4,424
Likes: 0
Received 1 Like on 1 Post
Sounds like the door lock rod inside the door may have come unhooked or something is broken in there causing it to not unlock. Only way to check it though is to take the door panel off which you need the door open to get it off. Good luck and keep us updated.
Old 12-07-08, 10:35 AM
  #3  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes on 93 Posts
There is a little spring on the latch assembly. It has broken. I forget where the spring is as it's been a while since I looked.

You should be able to get the inner door panel open a bit and unlatch the door from the inside. Then replace the latch assembly.




All times are GMT -5. The time now is 12:01 PM.