3rd gen twin turbo into 2nd gen ?
12-16-08, 09:46 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: waterbury,ct
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen twin turbo into 2nd gen ?
I have a 87 rx and i was woundering if i could and what i would have to do to put a 3rd gen twin turbo into my car. is it worth it how much would it cost me. is it just a matter of getting a new computer and the wiring harness or should i stick with a 2nd gen motor i currently have a non turbo and i am deffintly going turbo but want to explore the possibility of the twin turbo3rd gen motor any advice on this subject would be greatly appreciated. thanx
12-17-08, 09:35 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
No, it's generally not worth it.
Using the stock FD ECU is very limited and only really good for stock power levels. That's still 250HP so nothing to sneeze at, but presumably you're also going to upgrade the exhaust, intake and intercooler. You are now outside of what the FD ECU can handle reliably, so you're looking at a standalone.
Also the engine doesn't bolt in, there are clearance issues with the downpipe and intake, and a whole host of other problems.
See the 2nd gen FAQ for REW swapping info.
Using the stock FD ECU is very limited and only really good for stock power levels. That's still 250HP so nothing to sneeze at, but presumably you're also going to upgrade the exhaust, intake and intercooler. You are now outside of what the FD ECU can handle reliably, so you're looking at a standalone.
Also the engine doesn't bolt in, there are clearance issues with the downpipe and intake, and a whole host of other problems.
See the 2nd gen FAQ for REW swapping info.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM