YUP!!! i just made that my sig.
|
Originally Posted by Polak Graphics
(Post 10428490)
Yeaup most cultures around the world will always look at it as the whiter the girl the more attractive ( until they get to a pale shade... :icon_tdow)
Most immigrants will always chase the white chick. Yeah i dont like the pale shade either. I tell people about my fascination with white girls but they think EVERY single white girl in this world i love. Like the pale ones, the fat ones, the weird ones. lol no its not like that. I just love white girls in general. If you took a 10/10 spanish girl, 10/10 asian girl and a 10/10 white girl and gave me an option to choose.... 10 times out of 10 ill go with white. If i had less than a second to choose which girl to have forever, i would choose the white girl in less than HALF a second lol. And yes immigrants love the white girl too. I work in an area where there are tons of immigrants looking for work. Lots of mexicans and guats. I am cool with alot of them cause they help me out with some work around my house and i help them out by recommending them for work with other people. They always tell me how they want white girls. I even show them porn from my phone of white girls and they literally DROOL over the phone. Its like i cant get them away from the video after i show it to them, their eyes are glued to the screen lol. White girls will always reign supreme til this world dies. Thats how it is. |
this is getting to be the stupidest conversation ive ever read, and im a member of the gixxer forums and honda civic forums
|
Originally Posted by helghast7
(Post 10431034)
this is getting to be the stupidest conversation ive ever read, and im a member of the gixxer forums and honda civic forums
|
im leaning more towards motec since there a larger company for the smaller guys then cosworth is and their PCM's seem just as/ if not much more robust then the other ones on the market
especially the ability to reprogram the PCM is a plus for when i go 20b later on in the cars life also i have a few friends that work with motec systems which makes it easier when i need help locating sensors or when i go on tuning runs, or when i need someone to monitor the car from the pits when i start doing track testing |
Dave, your dropping the PFC?
dam you and the pink one no love for for the 8 bit ecu's:lol: |
haha yea thats one of my "in the very near future" plans its so annoying to watch other peoples cars and look at all the shit they can do, and what they can modify and all the adjustments and all the safety backups and shit...and then look over at my pfc and think...."well, i can adjust the fuel map.......and.......change the rev limiter....ohh and adjust the brightness on the commander!"
stick a fork in me cuz im done with that crap and whats he doing to that victoria's secret advertisment? lol how badass would that be to see his car in a real VS ad though? |
heres why i want it gone mostly:
stock engine reluctor wheel= http://i301.photobucket.com/albums/n.../tonering1.jpg aftermarket new reluctor wheel(example chris' 20b fd had something similar though)= http://www.enjukuracing.com/images/trigger_wheel_1.jpg really makes you realize why knock is such a big issue with our engines no? |
Originally Posted by gmonsen
(Post 10431623)
"This is an insane asylum!" says the one drunk at a party.
"Well, all you need is an empty room and the right kind of people". William Powell, My Man Godfrey, 1936. Gordon |
whats goin on guys im originally from the area trying to get back in the scene... pickin up a roller and what to kno whats shops are good in the area been away for almost 6yrs... if anyone can point me in the right direction would be highly appreciated
chaz |
I've had lots of luck with IRP. Some of the locals take their car to PA (SpeedOne, Dave's old shop was KDR). There is a thread about shops in the NE section. If it were me (as of right now) I would only take my car to the 2 places I mentioned. If you go to a meet, you might find some good people who work on FDs.
|
Originally Posted by helghast7
(Post 10431811)
heres why i want it gone mostly:
stock engine reluctor wheel= aftermarket new reluctor wheel(example chris' 20b fd had something similar though)= really makes you realize why knock is such a big issue with our engines no? http://i705.photobucket.com/albums/w...h_a46ef825.jpg |
yea that was a year ago while the car was still being built, if you look on the right my wire harness is hanging out on the shock tower
doesnt look like that anymore the only picture i have of it as of last year: http://i301.photobucket.com/albums/n...20FD/jake1.jpg depending on how im feeling ill probably go single and remove some things that have been bugging me whoa, just looked at you engine bay..and you say i have a lot going on? lol mines crowded because i still have the power steering, a/c compressor, and CC whats going on in yours dude? :lol: |
Originally Posted by helghast7
(Post 10433068)
yea that was a year ago while the car was still being built, if you look on the right my wire harness is hanging out on the shock tower
doesnt look like that anymore the only picture i have of it as of last year: depending on how im feeling ill probably go single and remove some things that have been bugging me whoa, just looked at you engine bay..and you say i have a lot going on? lol mines crowded because i still have the power steering, a/c compressor, and CC whats going on in yours dude? :lol: It looked a bit cleaner with out the intercooler hack up. http://i705.photobucket.com/albums/w...r/6068630d.jpg |
lmfao!!! thats an awesome saying, im gonna use that at some point
it doesnt look all that bad, only questions i have are, whats with the wires in the upper left by the abs? and whats with all the vaccum hoses running down the drivers side to the nose of the car..i cant for the life of me think of what they could be used for... A.I.? |
Originally Posted by helghast7
(Post 10433101)
lmfao!!! thats an awesome saying, im gonna use that at some point
it doesnt look all that bad, only questions i have are, whats with the wires in the upper left by the abs? and whats with all the vaccum hoses running down the drivers side to the nose of the car..i cant for the life of me think of what they could be used for... A.I.? Once you see it up close this summer you will see that its not that bad but rather simple,I am just some time an impatient fuck and need to get things done fast. |
yea i hear ya
the only reason i still have the ac compressor in is simply because i was in too much of a rush to find a belt that fit only the power steering haha |
Originally Posted by helghast7
(Post 10433141)
yea i hear ya
the only reason i still have the ac compressor in is simply because i was in too much of a rush to find a belt that fit only the power steering haha |
yea i plan on it, in the summer i kinda make the car my DD so despite what some people say its to much of a pita to have to deal with not having it
had this been a full track car, i would have thrown it out maybe my next one |
Dam Dave just when i was about to start making moves on a datalogit....
Pfc is still not as bad as most make it. There a bunch of features and saftey's that most people don't even know about or bother to tune. Of course it goes back to needing a datalogit to tap into those features. If i do rip the sequentials out on this setup over the winter i might have to join the bandwagon. |
motec has the ability to wirelessly stream live data from the car to a computer in the pit area
how tits is that? |
< was wondering why the 8club thread was dying ....
|
Yea, that would be nice but there to expensive even for any 20b aspirations i see myself at most with a microtech.
Im gonna stick with PFC for now. Anyone have a Datalogit blackbox fs.... |
I'll be with a PFC for a while. I don't see the need in going with anything else right now. The PFC is enough for my goals and for another FD in the future, that is, unless I'm missing something.
|
Werd ^ even scoots 4rotor uses the power FC...... he just uses two of them ;)
|
Unless they finally updated something it's because it's 2 12a's smacked together so all you need is that
I don't like the PFC, nore do I trust something that processes less information then my graphing calculator Ignorance is bliss they say but I'd rather no what my engine is doing and no my PCM is making adjustments to keep things safe |
Originally Posted by helghast7
(Post 10434632)
Unless they finally updated something it's because it's 2 12a's smacked together so all you need is that
I don't like the PFC, nore do I trust something that processes less information then my graphing calculator Ignorance is bliss they say but I'd rather no what my engine is doing and no my PCM is making adjustments to keep things safe I agree with helgast the power FC is surely an old tech gadget, but it works, it's cheap and plug and play this is why most of us use it, it's simple and it keeps our cars running pretty well. But for people who demand precision the power FC just isnt good enough specialy when it comes to self adjust when for example knock happens. |
its going to be nice out, time to bring this thread back from the dead... Whos rollin???
|
im going
|
Edgewater THURSDAY NIGHT MOVIE MEET
|
All times are GMT -5. The time now is 08:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands