^ Yep u need that ;)
Where u been homie???

the place i got mine done at was 50 bucks for the back window
couldnt complain about the job either

50 bucks?! where da hell was that at brian?? its a good price

wats up fellas my name is polito im new to the site located in tarrytown westchester county and looking for the rotor heads.....also looking for some parts racing beat headers and exhuast if u kno any1 lmk asap

i kno right..i went to other places and they were like wellllll with the way the window curves and blahblahblah itll be around 180+

i got it done at Strictly Tint or strictly automotive tint something like that


Strictly Window Tinting
187 Bloomfield Ave,
Bloomfield, New Jersey 07003
973-748-9333

there ya go

and its 50 to get just fronts done too..but still 100 for whole car is good. lifetime warranty and all that other bs

I'm guessing you have a NA FC because you said header right?

I have a custom exhaust I'll sell ya... Come on Tues and you can check it out/ hear it on the car. Header back, no cat, and your 5th and 6th ports will open.

2.5" Stainless Steel into 2 Magnaflow 7" round cans. Sounds GREAT!

I'm guessing you have a NA FC because you said header right?

anyway... I'll hook ya up lovely with this:

http://im1.shutterfly.com/media/47b9...D550/ry%3D400/


http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

ATTN DAVE

You need to bu something like this NOT a beat up FD

http://www.v8rx7forum.com/cars-sale/...ed-rx7-fc.html

SUPER clean went high 11's and has under 30,000 miles on it

2001 LS1
28k total Miles (only 3k after swap)
LS6 Intake Manifold
241 Heads
Custom CAI
2.5" Dual Exhaust
X Pipe
Magnaflow Cans

T56
Turbo II Rear

Power Steering
Power Windows, Sunroof, Mirrors
No A/C
No Heat (could be put back in)
Alpine MP3 CD Player
New Front Seats
Autometer Gauges
Tinted Windows
17x8 Cobra Wheels
275 Nitto 555R Rears
235 Goodyear KDW Fronts
asking $11,500

http://i215.photobucket.com/albums/c...f/DSC01690.jpg

http://i215.photobucket.com/albums/c...f/DSC01680.jpg

let us know what parts you need, i have a bunch, RB single in and out presilencer, rear wiperless hatch, who 4 lug setup with stock base wheels with tires, misc. parts...some body parts, gxl wing...

and i also have some sound system parts

and andrew...unless that v8 can go up to 10k rpms or past it, i dont want it....plus the FC interior is balls...and i dont really like the way a normal v8 sounds...its to....normal and boring..its the main reason i got into rotors...because there different, strange..feared and hated because of how odd they are....and so what if the FD i get was beat...im most likely going to fully restore it(well not as full as benny but..close enough) but thats fun for me its all part of the enjoyment

besides that..why would i want something finished? weres the fun in that? im not lazy...and im not the kind of person that gets my work done for me...so why get a finished car

like i said, its half the enjoyment to fix it up and make it better

1 no way. i barely changed anything significantly important other then bushings and its running a deep hole in my pocket.. cant image what a real restoration would cost.......


2. so you get a rubber hanger yet? hahaah:lol:

seriously..i dont think they will ever get them in stock...im probably just going to have to go through like RB or mazdatrix

I have some at my shop :lol: you can use autozone/pep-boys stuff... go to minekie (sp)

ooo strictly? yeah my boi used 2 work there.. i live maybe 5 min from there towards North Newark lol never knew they were that cheap.

bow chika bow wow

under my car lol. bought me the bible of the FC rx-7 aka the complete 86-91 Rx-7 haynes manual lol best investment by far. me and my boy chris have officially decided retarted mechanics are not allowed to touch my car anymore. only us and people we know for sure who are worthy enough and knowledgeable enough to turn a wrench on it. i sent my car to get a break hose replaced at this mechanics shop near my job. I come to pick it up and it dosnt start i was like WTF!? so now its on ramps in my driveway. new spark plugs rebuilt starter did the unflooding procedure just waiting for a warm day to try starting it up again hopefully that does it. it wants to though weve def made some good progress. oil seals are next- i found out i can replace em without a full rebuild or ripping the motor out of the car.

SO DAVE AND ANDREW LOOK OUT LOL CUZ AFTER THOSE ARE REPLACED ITS ON BITCHES! :D

how the fuck are you gona replace them without removing the engine?

ok look matt...the first pic shows an open rotor assembly

the second pic is me pointing to the seals you need to replace....

so i really want to know how you dont have to remve the engine to get them

wait what the fuck haynes manual lied! those bitches! i thought it was 2 seals one on each end of the eccentric shaft!???

and i know what an open rotor assembly looks like dave....im not that retarted

those are the rear main seal and the front seal....you only need to change them if oil is leaking out of the engine and onto the ground

i def just spelled retarded as retarted wow hahahaha

and i just thought u might want a little pic of refference...plus i thought i would show that my spare engine is apart!!

fuck so wow nevermind im just gunna get a new motor

why is your spare engine apart? you building some kind of 4 rotor FD like the one i have in my secret storage place?

lmao...well if you want you can buy and rebuild my spare and port it....the housings at least for the rear rotor are not damaged and the rotors are good, though i didnt test spec

hell yea im getting it rebuilt and droping the whole thing in my car...gona be slapping you silly

oh god gf is kickin me off her comp....hopefully for the only thing better than talkin rotoary and Rx-7 :D ttyl boys hopefully see you guys tomorrow 7 or not! PEACE

Isnt that an oxymoron? ahhaha jk

lol i am

Whipped:whipit:

lmao!!!

question: my rear is leaking oil nuffin crazy but lil drops once and a while wat can that be???? im just getting into rotary and i need some help

can you please be more specific? rear as in differential? or rear of the trans? or rear of the engine?

sry differential.....i was told to check the bolts or the seals idk any suggestions

ok most likely what has happened is either a/ your diferential case seal has finally shown its age and is leaking in which case you need to either, tighten the bolts around the case or replace the seal

or b/ one of your axle seals are leaking and need to be replaced..

now an axle seal is fairly simple, remove the axle and r&r the seal

however if it is the differential seal that needs to be replaced, if i remeber correctly, im affraid the diff has to come out for this because of the way the case is made...it doesnt simply have a cover, it sort of spits in half..however im basing this on memory and to confirm this i would have to tomorow go into my garage and check my spare

which rx7 series do you have?

oh... almost totally forgot....the only other thing you can do for the main seal is to use that rtv sealant and make a ring around the seal...without even opening it...i cant guarrante it will work..or hold...but theres a chance it will

i wouldnt mind my aftermarket alram removed and a new one installed with possibly remote start. also how much for a stand alone remote start on say a quest?

https://www.rx7club.com/ne-rx-7-forum-30/%2A%2A%2Aall-mazda-orange-county-chopper-meet-may-2-3-2009%2A%2A%2A-820910/

anybody wanna roll out to it?

im game if i decide to go

^ yeah ben u missed the last one... it wasnt too bad..

lol ur a member on the 7 club? haha i though u deleted ur acount and just went to 8club ahhah

u goin? tnc rolling out? idk i heard mixed reviews about it......

maybe...

perhaps

FB deal went sour... got my money back though... bummed :(

Got a reply from the owner instead of the secretary:

"Car was climate-controlled kept since new....until 5 years ago when the father died. Then the son gave it to his son to take to college, and now it has 62,000 mi on it. Ugh. Hence the $3500 price. He repainted it and he says it's in great shape. Son has moved on to something more modern, so it needs a home.

Still interested?"

lol sounded like a scam to start with



hmmmm now son driving it (beaten) and repainted (what happened?)
idk have u checked it out at all?

such a shame that a nice car went to some retard kid. Public lynching for the dad?

that suks man... it was too good to b tru...

If everyone goes im down... but not by myself

ROLL CALL BITCHES!!!!!!!!!!! Whos going 2night!!!!!

P.S.
Andrew if you can.. bring that instruction manual.. thanks

im going tonight..i think im gona take a nap first....or play killzone 2...still not sure which

I threw it away... you don't need it.
















j/k :hahaha:

^ WOW!!!!
well how else do you expect me to remove this spring that shot through my hood!!!!