Getfast: Wow, we must have met?! I was working at Patriot sunday as well!

Prior to the event at VA beach, I'll be getting new front tires, rear camber link, and dtss eliminators. I'll also be saving every damn penny I have due to monthly bills, a trip to Utah this month, those car parts, and more.. while working a money-making highschool job :D

I need to find exactly where my small oil and coolant leaks are coming from, or I won't pass inspection. DIY omp lines aren't too expensive, so I'll jump on that for futures sake anyways. If even a drop comes off the chassis during tech inspection, will I automatically fail?

It's doubtful that a tech inspector would even notice (unless your car smelled like burning oil/coolant, or was smoking.)

My old BMW had a small weeping leak from the oil pan gasket for... at least 10 events, hahaha. A lot of it depends on the type of leak (pressurized/ready to blow vs. not likely to get any worse from a bit of hard driving.) I once bailed out of an event less than 24 hours beforehand due to a power steering pressure hose that was leaking very slightly, for fear that it would explode and make a mess for everyone else. Knowing where/why/how it's leaking is 90% of the battle.

Hope it helps,

Jon

hey niburu I don't know if I'll be out much until it gets warmer...Friday really hurt. But DANGIT I had fun, I love listening to that VW guy he's hysterical.

skizzle also make sure your wheel berings are tight, I nearly got bumped because of too much play in my wheels
they're really easy to tighten up

I'm definitely a strong believer on that as I just walked inside from trying to figure out why I have an F'ing FUEL leak!?! I searched, and nothing. It is coming from the pass side. Could someone give me a hand sometime soon and help me find it?

On a lighter note, I found my oil leak. It was at one of the OMP lines - tightened it and now its good!

I have a rear wheel bearing waiting to be put in. I'm going to order dtss elim tonight and then try to do it all together sometime soon.

well I went ahead and ordered a rebuilt light switch and relay from Icemark, so with any luck I'll be doing the install next week

Man I remember this thread when it had 75 pages.....how the times do pass.

I just moved *again* and for the last time for a very long time. I moved my OZ Mito wheels *again* and am SOOOO ready to sell these things.

So, to all three guys in here who have FD's:

OZ Mito 3 piece
18x8.5 front +50
18x10 rear +42
FD centerbore so hubcentric

6 wheels total - a brand new spare front and rear wheels.

A few pics:

http://cafcwest.netfirms.com/PicGall...l_PICT0189.JPG

http://cafcwest.netfirms.com/PicGall...l_PICT0076.JPG


If interested, drop me a line at cafcwest.at.gmail.dot.com

$700 american greenbacks!!!!

I can testify to the niceness of said wheels

well guys I might be picking up a Greddy turbo kit for the FC, but I took it out on stock suspension last night and boy did it suck! drifting was more like a rocking chair, and the car lifting so much on acceleration it was rediculous.

bah, just save your money an buy an FD

That's why YOU should buy them :D

I would if I weren't selling the car. :P

Buy 'em, include 'em, and mark the FD's price up... at least $700. ;-)

Jon

I would need to actually have $700 to spend

Dude, I know you've got it - you just don't want to spend it.

Big baller Quinn getting stingy in his old age, eh?
(I'm trying to push your buttons, make you impulse buy them and prove me wrong)

I'll show you my equity line, mortgage, and creit card bill sometime.
Now who on here besides me actually owns a house?
If I had $700 I'd be putting in the clutch the car needs.

If you'd like Jason I can list them with the car when it goes into autotrader or whomever I wind up talking with.
Hell maybe Robin should get them, he's got FD wheels on his monster right now
he can use all the traction he can get.

eh, I threw them on eBay...

http://cgi.ebay.com/ebaymotors/ws/eB...6530&rd=1&rd=1

Anyone goto this Starbucks this past Friday?
I didn't go, was just wondering if the guys in the Supra showed up again at all.

I was there for about 5 minutes. Didn't see a Supra.

Jon

I still can't believe they drove all the way up from Norflolk just to flake on buying the car the next day.
Ah well, I'll see what Ralph wants for a clutch replacement and into autotrader it goes.

PS: lookey I just hit a thousand posts

Just in case one of the local guys wants it, I'll make ya a deal. Apex'i dual N1 exhaust.
https://www.rx7club.com/showthread.php?t=623134

now what are you gonna put on the car? a pea shooter 2.5" N/A exhaust?

Tsk Tsk Zach. I just say run open downpipe, cops would never know!

I think 4" single piping would work just fine, especially with a non-fartcannon muffler (sorta like what's on my FD)

is that what he is running? 4" is kinda hardcore for the stock turbo, but that would be nice for a big setup