Richmond VA RX-7 Owners
03-28-06, 07:27 AM
#3976
Mechanic say Dave need new brake pads to pass inspection
Dave buy some yesterday from BapGeon
Mechanic also say brake rotors need to be turned
Dave say nuh-uh, me have extra set of brand new brake rotors previous owner gave Dave for free
Me will be at Friday Starbucks meetup for sure in FD
Dave buy some yesterday from BapGeon
Mechanic also say brake rotors need to be turned
Dave say nuh-uh, me have extra set of brand new brake rotors previous owner gave Dave for free
Me will be at Friday Starbucks meetup for sure in FD
03-28-06, 07:29 AM
#3977
Originally Posted by Zach McAfee
Zach change spark plug too.
Zach ordered new rear main seal, water pump gasket, and dual belt underdrive pulleys.
Zach ordered new rear main seal, water pump gasket, and dual belt underdrive pulleys.
the other sounds like work but you got a garage with tools n' stuff
bastard
03-28-06, 03:22 PM
#3978
I have injector envy!
yeah i dont know why Zach is so "worried" about keeping fluids in his engine. So what that their is oil leaking out of the back and coolant leaking out of the front. That is money that could be spent on stickers or double decker wings.. Oh well I guess he will learn one day.
Thank god my T2 swap didnt have any leaks or bad seals!
Thank god my T2 swap didnt have any leaks or bad seals!
03-31-06, 11:34 AM
#3980
Rotary Enthusiast
Join Date: Aug 2005
Location: Richmond, Virginia
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
PM me if anyone is interested in the purchase of an 84 FB. Check the first gen for sale section. I'm hoping to sell this, buy another, and eventually swap.
03-31-06, 11:34 AM
#3981
Rotary Enthusiast
Join Date: Aug 2005
Location: Richmond, Virginia
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
PM me if anyone is interested in the purchase of an 84 FB. Check the first gen for sale section. I'm hoping to sell this, buy another, and eventually swap.
04-05-06, 11:42 AM
#3988
I have injector envy!
Zach, if I come home and find the hubs missing off my 7, I will beat you with the barstool that you made it from.
BTW does anyone on here know how to free a stick coilover? My hks coilover perch wont freakin move! All of the other 3 are fully adjustable.
BTW does anyone on here know how to free a stick coilover? My hks coilover perch wont freakin move! All of the other 3 are fully adjustable.
04-06-06, 04:37 PM
#3989
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yusoslo
Zach, if I come home and find the hubs missing off my 7, I will beat you with the barstool that you made it from.
BTW does anyone on here know how to free a stick coilover? My hks coilover perch wont freakin move! All of the other 3 are fully adjustable.
BTW does anyone on here know how to free a stick coilover? My hks coilover perch wont freakin move! All of the other 3 are fully adjustable.
the adjuster or the actual piston/shaft of the shock
04-06-06, 06:41 PM
#3990
I have injector envy!
Yeah it is the top perch. I was able to free the lower perch (locking one) but the upper perch where the spring sits is seized up.
Also Jason I will be getting that throttle body from you this week, I just have been slammed moving into my new office.
-BJ
Also Jason I will be getting that throttle body from you this week, I just have been slammed moving into my new office.
-BJ
04-06-06, 08:52 PM
#3994
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yusoslo
Yeah it is the top perch. I was able to free the lower perch (locking one) but the upper perch where the spring sits is seized up.
Also Jason I will be getting that throttle body from you this week, I just have been slammed moving into my new office.
-BJ
Also Jason I will be getting that throttle body from you this week, I just have been slammed moving into my new office.
-BJ
Ok man. Just gimme a ring. Bring the coilover as well, we can set it up in the vise and try some PB Blaster and some "motivatoin"
-Jayson
04-10-06, 07:12 AM
#3995
Originally Posted by cafcwest
Ok man. Just gimme a ring. Bring the coilover as well, we can set it up in the vise and try some PB Blaster and some "motivatoin"
-Jayson
-Jayson
On FD news; the coolant leak the PO mentioned he had has resurfaced, but I have a rough idea where it is and I can hear it now. I'll have to pull the throttle bddy and the turbo intakes to get at it though. It's right in area above the turbos and exhaust manifold, what coolant line is over there I have no idea - heater core line maybe?
04-10-06, 06:13 PM
#3996
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
THREE SETS OF CONVERTIBLE WHEELS FOR SALE:
Priced to move!
(local guy prices quoted)
Set One - Immaculate - $175
Set Two - Near perfect - $150
Set Three - One of two have minor curbage, currently mounted with a set of Hankook R-Compounds 205/50/15 in good shape. - $250
Add center caps (two sets of four to choose from) for an additional $50.
Priced to move!
(local guy prices quoted)
Set One - Immaculate - $175
Set Two - Near perfect - $150
Set Three - One of two have minor curbage, currently mounted with a set of Hankook R-Compounds 205/50/15 in good shape. - $250
Add center caps (two sets of four to choose from) for an additional $50.
04-10-06, 07:50 PM
#3997
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
pics of everything here
https://www.rx7club.com/showthread.p...92#post5517992
https://www.rx7club.com/showthread.p...92#post5517992
04-10-06, 09:33 PM
#3998
I have injector envy!
jayson. Do you have the plastic shifter bushings? If not I am going to order some tomorrow on my lunch break. Let me know, or I will call you to pick up the TB. thanks