I'd rather stick with S4, since I don't have the S5 bumpers.

Hood for me. Is it color code WY by any chance? :)

Oh yeah, I need DS trim!

I think I'm going 12a dizzy. I'll look in my old RB catalog and see what's there.

WY yes the color code just happens to be WY, it does have some hail damage but not to bad and not really noticable except at a angle, the fender trim is black and all the pieces are there. You are really working your way to a 87 10th anny.

Hey zach would you be interested in the 4 piston brake swap along with the 5 lug setup?

86 fc for sale in chesterfield
 

i am selling my 86 fc engine is locked and i really dont have the money or knowlege to rebuild it myself the bodu is on good shape this is the perfect car to turn into a drift machine it has been looked at by rgordon1979 and even he said that i could get about 5-6 hundred for it

No, thanks. I'm selling the '87, and the GTU already has the big brakes.

When is a good time for me to pick up the hood and trim? I have the 30th and the 31st off, so that would work for me.

i get off the 31st morning at 8 give me a call and we can figure something out 586-4823

[QUOTE=Zach McAfee]I'm selling the '87QUOTE]

What the deuce?!?


Speaking of...you almost hit me with that little white wonder last Friday morning Speed Racer.

does any one here know where i can get a gasket rebuild it that isnt gonna cost a arm and a leg ?

unfortunately thats really the only thing that makes rotaries expensive to rebuild, I haven't seen any kits for under a grand

i think atkins rotary has the cheapest kits if im not mistaken.

i was toying around the other day at work, and i tore my old motor down. it didnt look that bad at first, but after some cleaning and more inspection, MAN that front housing was fucked. the front was alot worse than the rear, but for some reason, the rear was the one that wasnt firing.

conclusion = i REALLY dont think the motor was bad. tired, yes, bad, no. i think my dad really doesnt know what the fuck hes talking about, but since he was willing it pay for half my motor, and it had 19k miles on it, i jumped on it. he swears up and down the motor was blown, but you could still see that it had compression front and rear.

i took lots of pictures, ill try to upload them tomorrow, or x-mas eve. im thinking of rebuilding the motor, possibly a 4 port 13b.......... turbo bitches. :D depends if i can find the right parts. everything in the motor looked to be in good shape minus the housings. the e-shaft had alot of heat marks on it. is that ok to re-use? i know if i do a 13b, i dotn use that e-shaft, but if i stay with the 12a rotors, can i reuse it?

So basically you need a set of good 13B housings, rotors (low comp turbo rotors?), and e-shaft?

fo sho... im uploading hte pictures right now.

http://www.rotaryaviation.com/overhaul_kits.htm

Try them thats where i got my kit from. Merry christmas to all!!!!

You wouldnt happen to live in greenhouse apartments would you? Is that car a auto or 5 speed? I doubt you would be able to sell it for much money, if it means something to you or you are willing to put like $1500 into it to get it running then its worth keeping. Or just hold out and you can get lucky sometimes on motor deals you just may have to drive a little ways to pick them up. I found a motor that had been in a car fire, picked it up from maryland and cleaned it up installed it in my vert and it runs damn good, no smoke, no flooding, can leave the car sit for 3 months and turn key and it purrs like a kitten.

round 1



https://www.rx7club.com/attachment.p...chmentid=87811
https://www.rx7club.com/attachment.p...chmentid=87812
https://www.rx7club.com/attachment.p...chmentid=87813
https://www.rx7club.com/attachment.p...chmentid=87814
https://www.rx7club.com/attachment.p...chmentid=87815

round 2


https://www.rx7club.com/attachment.p...chmentid=87816
https://www.rx7club.com/attachment.p...chmentid=87817
https://www.rx7club.com/attachment.p...chmentid=87818
https://www.rx7club.com/attachment.p...chmentid=87819
https://www.rx7club.com/attachment.p...chmentid=87820

round 3


https://www.rx7club.com/attachment.p...chmentid=87821
flaking

https://www.rx7club.com/attachment.p...chmentid=87822
yea, i think ill reuse that one :D

https://www.rx7club.com/attachment.p...chmentid=87823
taking up space at work.. WOOT WOOT

https://www.rx7club.com/attachment.p...chmentid=87824
seals that i didnt loose.

i also wanted to add that...

one of the guys at work was a master tech at mazda in the second gen/early thir gen days (he came to lexus in early 94) anyways, he thought the apex seals were rubber!!! he picked one up and asked me what it was, i told him it was the apex seal, and he goes "damn, i could of sworn they were rubber".

Ok, I'll give you a call in the morning.

I'm thinking around 5.5K. You interested? It's the fastest RX-7 in Richmond ;) . Everything is included; I don't have time to swap it all over.
Yeah, I was probably late, I'm almost always late.

As far as rebuild kits, it'll cost you about $600, and then whatever it costs for a used rotor and used housing, assuming those are trash. I think it is safe to say, everything said and done, about $1000 to rebuild it yourself, turnkey. Of course, assuming you didn't screw up. :)

Mike, I have a 12a & 13b eshaft. I have a handfull of other stuff you can have. Just let me know. Turbo 4 port in sounds like fun.

Merry X-mas errrbody. :)

i might take you up on that zach. im really thinking turbo 4 port 13b it is. the only thing is, i want it to be done right since i have the motor apart, and that might cost me some $$$.

also, i cant find a decent rebuild kit for a 12a. they are mostly for 13b cars. i found a rotor kit (oil seals, side seals, corner seals, apex seals, all the springs, front/rear main seals) but no coolant seals and ect.

i know if i do the 4 port thing, i have to use first gen 13b rotor housings because of the way the coolant seals are cut, so do i have to use a first gen 13b rebuild kit? will all the gaskets and shit fit? if i have to buy 2 different kits, and mix them up, i dont think it would be worth it.

im not sure what i would do for fuel. megasquirt sounds cool, but i dont know if i want the headaches. i might use a decent sized weber and do a blow through. id have to use atleast a t3, maybe a t3/t4. intercooled definately.

i think my little first gen would be alot of fun with 200-250 hp :D

well i found a guy that is selling his old s5 engine b/c he just did a t2 swap on his 89 he only wants 150 for the engine but he lives in nj and the engine needs to be rebuilt do you guys think that it would be worth it ?

Wouldn't that be one step forward and two steps back?! I would steer clear and find one out of a wrecked car that is in running condition.

I dont think thats quite a good idea, now you would just have 2 motors needing a rebuild. Its not that hard to find these motors or parts for these motors. I seen you looking at some of the same motors i have inquired about and ive seen some pretty good deals. You just have to know if it is worth it to you, my brother got his self into a little more than he bargained for when he picked a RX7 to rebuild and use as a daily driver. They have lots of gremlins and they are ready to growl when you dont seem to have the time or the money to fix them.

my turbo swap should start next weekend, if i can convince the wife to park her car under the carport for awhile. Ill have both cars side by side and hopefully it will go smooth. I might pull the motor out of the TII first to see why it isnt boosting, im thinking its the wastegate or bad turbo. And i might take a little bit of time to clean the engine bay on the vert, and get rid of the rest of the AC chit. Ill try and take plenty pics and get them posted.

just like they said, what would justify getting another motor that needs to be rebuilt? they you would have two bad motors, and you would be in no better of a situation. the only thing good i can see, is if both have a blown rotor, you can get a rotor/housing from the other motor, but you still need a rebuild kit, and a rebuild. its far worth it to just get a running motor.