Massachusetts MEET
#4355
I forgot this forum existed for a few months. Update on my t2 I sold to Alan aka 86fc3sred (I think that's his name on here), motor is blown. Will most likely be swapping an s5 shortblock in soon. I'll update the situation once he gets an engine.
#4356
Some one buy my dam sa lol 500$ or flat trade for a motorcycle like a Honda cb(not a Honda CBr) or any bike that can be turned in to a cafe racer. I'm gonna be moving and feel bad about the car staying with the folks etc.
If any one needs a fabricator hit me up it what I do for a living if it metal I can make it at this point I got roughly 14 years with working with metal
. I also am a extremely good wood worker I build custom guitars and basses and repairs on the side from exotic wood all hand carved . I also can make parts from carbon fiber etc mainly cosmetic stuff I don't have a walk in over lol.
If any one needs a fabricator hit me up it what I do for a living if it metal I can make it at this point I got roughly 14 years with working with metal
. I also am a extremely good wood worker I build custom guitars and basses and repairs on the side from exotic wood all hand carved . I also can make parts from carbon fiber etc mainly cosmetic stuff I don't have a walk in over lol.
#4358
It hasnt run since last summer but then it was the **** lol. Motor is strong.
The bad. It's my old rat so it looks rough. Just needs springs and a sway bar.
Gas change it went bad.
It will Need to be charged.
And could use a brake job . 4x110 rims err. But check out respeed for all the stuff u can do.
The good tons of spare parts a rebuildable turbo . All will be included.
I allso did a custom spark setup with 3 blaster coils and hei ignitors.
**** 400$ and it's your or find me a Honda cb 250-500cc
Will need to be towed on flat bed or get a set of rear springs and tow it normal way.
Parts are cheap for this just got to many cars and no space and would rather have a rotary guy have it then it go to china and turned in to a Kia lol.
The good tons of spare parts come with it.
The bad. It's my old rat so it looks rough. Just needs springs and a sway bar.
Gas change it went bad.
It will Need to be charged.
And could use a brake job . 4x110 rims err. But check out respeed for all the stuff u can do.
The good tons of spare parts a rebuildable turbo . All will be included.
I allso did a custom spark setup with 3 blaster coils and hei ignitors.
**** 400$ and it's your or find me a Honda cb 250-500cc
Will need to be towed on flat bed or get a set of rear springs and tow it normal way.
Parts are cheap for this just got to many cars and no space and would rather have a rotary guy have it then it go to china and turned in to a Kia lol.
The good tons of spare parts come with it.
#4361
#4363
#4368
#4369
I sill got the car. Trying to sell it still.
My phones dieing best bet is to call me after 5 tonight I have to go get my rx8 from the shop. Wheel bearing 80$ labor 200$ ****.......
So yeah call me after 5 tonight.
My phones dieing best bet is to call me after 5 tonight I have to go get my rx8 from the shop. Wheel bearing 80$ labor 200$ ****.......
So yeah call me after 5 tonight.
#4370
We should have a meet sometime soon. It'd be nice to meet some of the RX7 crowd. My car will be on the road thurs/fri of this week and so anytime after that should work for me. Side note- I picked up some Work VS-XX 18's and decided to go another route for wheels/tires so if anyone is interested PM me.
A set of Work VS-XX 18" rims in 5x144.3. Fronts are 18x8.5 et32, rears are 18x9.5 et32. Faces/lips are in good condition. One wheel has a couple of minor curb marks in the lip, several have a bit of wear around the center caps. The barrels are a bit dirty and one has a scratch all the way around the inside of the barrel (would not see when mounted).
A set of Work VS-XX 18" rims in 5x144.3. Fronts are 18x8.5 et32, rears are 18x9.5 et32. Faces/lips are in good condition. One wheel has a couple of minor curb marks in the lip, several have a bit of wear around the center caps. The barrels are a bit dirty and one has a scratch all the way around the inside of the barrel (would not see when mounted).
#4371
A set of Work VS-XX 18" rims in 5x144.3. Fronts are 18x8.5 et32, rears are 18x9.5 et32. Faces/lips are in good condition. One wheel has a couple of minor curb marks in the lip, several have a bit of wear around the center caps. The barrels are a bit dirty and one has a scratch all the way around the inside of the barrel (would not see when mounted).
#4374
CONNECTION 7 IN LEOMINSTER, MA.
PROUDLY OFFERS ROTARY ENGINE COMPRESSION TESTING.
PLEASE CONTACT SERVICE MANAGER (THIAGO)
----------------------------------------------------------------------------------------
CONNECTION 7
LEOMINSTER, MA
978.660.0126 - LUIS/THIAGO
email: Connection_seven@rocketmail.com - THIAGO
no web site yet: coming soon.
Repairs, swaps, upgrades etc...
YOU CAN ALSO PM ME FOR ADDITIONAL INFORMATION
PROUDLY OFFERS ROTARY ENGINE COMPRESSION TESTING.
PLEASE CONTACT SERVICE MANAGER (THIAGO)
----------------------------------------------------------------------------------------
CONNECTION 7
LEOMINSTER, MA
978.660.0126 - LUIS/THIAGO
email: Connection_seven@rocketmail.com - THIAGO
no web site yet: coming soon.
Repairs, swaps, upgrades etc...
YOU CAN ALSO PM ME FOR ADDITIONAL INFORMATION