CokeRx7

Buckwild would be be ok to have the TII manifold w/o the turbo and intercooler?

NissanConvert

iTrader: (1)

on the drive home something shot out of my tail pipe and the car started running better. then on 32 i hit a bump and the exhaust started to hiss. but then it went away and the car got very quiet and smooth. it's better than ever but still underpowered.

ErikTheDead

that's great news! I finally got the vac leak fixed on mine - idles smooth, but needs to be tweaked. Running super rich - it will hit fuel cut easy in third gear (so i don't let it) I'm thinking about getting with you and Ken about that MegaSquirt asap - how much for everything i need?

adrock3217

Lol Erik - today Jason's T2 hit fuel cut in first. Third? Lol..

CokeRx7

Ok.. i was bored and took a look at mazdaspeed.com.. and saw the front lip.. it looks pretty cool

http://www.japanparts.com/Pic/pic128/030-001.htm

Tofuball

It is $420 for the Rotary Prepared MegaSquirt itself, and it uses all your stock sensors. That is the version v3 board (the one I reccomend) You will need to solder a special connector onto your wiring harness to accept the MegaSquirt.

HOWEVER! We are currently developing a Plug-And-Play Rotary Prepared MegaSquirt that does not require soldering, you just replace your stock ECU with it. The test cars for this will be my GXL and my TII.

Meow!!!

Tofuball

Lets do it! The car is ready for inspection, except it does not have a cat on it.

Bukwild

yeah its sounds like you had a clogged cat. It happens all the time. Cat is only good for about 60k but most people are still running the the factory cat above 100k. If you don't need emissions just un bolt it and smash a metal pipe through it until all the metal mesh is gone. then you will be fine

Bukwild

Coke you can run any manifold you want on you engine as long as you don't have any leaks. The main reason people switch to these is the lower manifold has been cleared out to except the stock FC turbo and manifold. You stock NA lower will hit up against it and you will have to carefully shave it down and remove some of the metal around the bolts. This makes the NA mani prone to cracking when you hit giant DC pot holes. If you want it you need to speak up because I have a PM from a member in San Diego who wants it but has not sent the paypal yet.

ErikTheDead

it goes up to about 7 lbs in 1st and 2nd, and it'll hit fuel cut in 3rd at like 4k when jumps to 10lbs or so.

so i haven't been flooring it - besides, avgs about 9.5 mpg....

i need an emisions hook up asap - how much do i need to fork over? ethier that, or i need to throw on a cat to fail emisions so i can get a waiver...but that is more of a pain in the *** to put the cat and airpump back on...

also - mike (crashdummy) needs an inspection/emisions hook up too

Bukwild

we might have to have a "needs a inspection" meet at the inspection place. I know I need one on the olds aurora. Plus all you guys can see how pimp my olds is now that Dave and I painted the wheels black. So when i roll up in a 14 ft long car with blacked out rims it will make your **** look weak.

CokeRx7

It was just a question.. you can sell it.. it was a question i had... Say if you were to replace the lower and upper IM with the TII manifold.. so there wouldnt be any bump and grind right?

muythaibxr

I should have this done next week... Just gotta solder up another msns-extra board and wire it to the megasquirt board... it'll probably take me a few days after monday (monday we're finally going to finish the wiring on the 'vert)

Oh, and I just noticed a new smiley... at least I think it's new:

Bukwild

Right its a direct bolt up. Plus is intake volume is larger than the smaller NA manifold.

eage8

iTrader: (9)

I'm pretty sure it's not a direct bolt on... considering your turbo is a 4-port and his NA is a 6-port...

eage8

iTrader: (9)

:gay2:

lol, there is a whole bunch of new ones

CokeRx7

So Eage8 you saying that i will have to do a lil modifications to add the T11 manifold? or just worry about the S5 manifold.. since it would be easier..

crashdummy

anyone want/need fenders? i have some decent condition red fenders and a steel hood i need to get rid of.... offer me something

im looking for around 60 for both fenders and the hood is 10 bucks.

eage8

iTrader: (9)

just go with an S5 manifold, you would have to change stuff with the TII one (like the side of you intake) and I think it would make you're car slower personally )

Tofuball

It would make your car slower.

Smokems

iTrader: (1)

I FINALLY FOUND MY PROJECT TII =)

Body is in ok shape, Paint sucks to hell and Interior is like 6-7/10 Needs a good interior vacuum and wash. Engine is also shot to hell needs Reman engine and rebuilt Turbo. Well I need lots of help figuring out how to get this thing to go VROOM VROOM. Please if u can help me out I am still learning about rotaries and engines in general, I would greatly appreciate it.

special thanks to TOFUBALL(Jason) and PELE(Theo). Thanks guys for helpin examine the body and tow it. Well gots to go to work see yall either tomorrow at the meet or whenever =)

Saheed

Tofuball

ErikTheDead

Yea! another TII in the area!

I'd say talk to Kevin Landers over at Rotary Resurection for a reman

NissanConvert

iTrader: (1)

hey what about me? i'll be turbo this spring.

Tofuball

So yeh, Theo and I towed Saheed's TII from Croften, MD, to Gaithersburg, MD (to his house)

It was supposed to have a blown engine, so we left the car in fifth gear on the highway (while it was being towed) so that the engine was spinning. The apex seals set properly, and now the car starts. However, I'm sure it has a blown coolant seal, and the oil looks like it came from the lungs of a lifetime smoker.