Maryland guys!
#7077
Zero Rotor Motorsports
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by eage8
for a couple days I was thinking about what it would be like to own a working rx7.... it was beutiful
#7078
"Yea, me too. I spent all the time and money adding in powertrain reliability, and now I can't roll down my goddamn windows "
Thats funny as hell. I guess you could convert to some GM switches from the bone yard.
Thats funny as hell. I guess you could convert to some GM switches from the bone yard.
#7079
1308ccs of awesome
iTrader: (9)
Originally Posted by Tofuball
Dude. I fixed my car, and I decided to wait at the garage for you to come
So I waited
And waited . . .
So I waited
And waited . . .
today I drove to work and I got here in an hour it's a lot better then the gay 2 hours on the bus/metro
#7080
MegaSquirt Mod
jason: That's awesome! Glad to hear the new alternator works, and even more glad to hear that whatever you did to the grounds and power cables coming off the battery worked! Now let me at it so I can wire up trailing
What kinks do you have to work out? Or are you just talking about:
1) getting trailing installed and working
2) air temp sensor
3) fuel pump
4) intake
5) passing emissions
??
What kinks do you have to work out? Or are you just talking about:
1) getting trailing installed and working
2) air temp sensor
3) fuel pump
4) intake
5) passing emissions
??
#7081
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Originally Posted by Tofuball
Dude. I fixed my car, and I decided to wait at the garage for you to come
So I waited
And waited . . .
So I waited
And waited . . .
#7084
Jesus is the Messiah
Originally Posted by eage8
sorry, me and christian got lost... a couple times, but it wasn't our fault endiku sucks at directions we got there at like 8:15. and you weren't there so we went to the el salvadorian place with out you!
today I drove to work and I got here in an hour it's a lot better then the gay 2 hours on the bus/metro
today I drove to work and I got here in an hour it's a lot better then the gay 2 hours on the bus/metro
I was waiting inside for you.
#7090
MegaSquirt Mod
Originally Posted by Tofuball
* Hugs myk *
. . .
* Is still wearing his YATTA! undies *
. . .
* Is still wearing his YATTA! undies *
and wtf is the "pele power mod"
oh yeah, and are you going to come back to the house tonight? Your cat misses you (and he wants you to clean up his poop)
#7091
Senior Member
Join Date: Oct 2004
Location: Baltimore
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tofuball
I WAS THERE.
I was waiting inside for you.
I was waiting inside for you.
#7092
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Originally Posted by muythaibxr
D
and wtf is the "pele power mod"
and wtf is the "pele power mod"
A stock positive cosnsits of the main thick cable with a battery terminal at one end and a small lug for the starter at the other. The end with the battery terminal also has a small pig tail for the fuse block...
A stock negative cable is one piece cable with a connector spliced in the middle. **** (engine bay grime, spilled battery acid, water, wahtever.) can get under the insulation where this connection is and corrode it up ruining the ground to either the chassis or engine.
Use the positive battery cable as your negative. Attach the lead that would normally goto the starter to somewhere on the bell housing of the tranny, or you could put it on the engine block.
Use the pigtail that would normally go to the fuse block and attach it to the chassis near the battery.
Dedicated cable for engine ground, Dedicated chassis ground. Good solid ground for starting and charging and the ground for the chassis electrical is just as good as the positive feeding it.
#7093
i love AWD
Join Date: Feb 2004
Location: Baltimore, MD
Posts: 1,836
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by krautrocket
which el salvadorian placeis this ... my friend omar owns a el salvadorian place round these parts
#7098
MegaSquirt Mod
Originally Posted by Pele
Take two positive battery cables. Connect one as stock.
A stock positive cosnsits of the main thick cable with a battery terminal at one end and a small lug for the starter at the other. The end with the battery terminal also has a small pig tail for the fuse block...
A stock negative cable is one piece cable with a connector spliced in the middle. **** (engine bay grime, spilled battery acid, water, wahtever.) can get under the insulation where this connection is and corrode it up ruining the ground to either the chassis or engine.
Use the positive battery cable as your negative. Attach the lead that would normally goto the starter to somewhere on the bell housing of the tranny, or you could put it on the engine block.
Use the pigtail that would normally go to the fuse block and attach it to the chassis near the battery.
Dedicated cable for engine ground, Dedicated chassis ground. Good solid ground for starting and charging and the ground for the chassis electrical is just as good as the positive feeding it.
A stock positive cosnsits of the main thick cable with a battery terminal at one end and a small lug for the starter at the other. The end with the battery terminal also has a small pig tail for the fuse block...
A stock negative cable is one piece cable with a connector spliced in the middle. **** (engine bay grime, spilled battery acid, water, wahtever.) can get under the insulation where this connection is and corrode it up ruining the ground to either the chassis or engine.
Use the positive battery cable as your negative. Attach the lead that would normally goto the starter to somewhere on the bell housing of the tranny, or you could put it on the engine block.
Use the pigtail that would normally go to the fuse block and attach it to the chassis near the battery.
Dedicated cable for engine ground, Dedicated chassis ground. Good solid ground for starting and charging and the ground for the chassis electrical is just as good as the positive feeding it.
Ahh. Good idea. I'm impressed. I would've just redone the whole power part of the wiring harness using new cables for everything, but would've hooked it up the way you've described.
#7099
i love AWD
Join Date: Feb 2004
Location: Baltimore, MD
Posts: 1,836
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by eage8
I'm not really sure what skooshy means... but it can't be bad
...just how many words can i use to describe the same thing...