Maryland guys!
#6901
Jesus is the Messiah
Originally Posted by Bukwild
Jason I can run it up to college park around 5-6ish if you are going to be around. remember I am right down rt1 in laurel
- - - -
REP POINTS FOR EVERYONE!!!!
#6902
MegaSquirt Mod
Originally Posted by Bukwild
Jason I can run it up to college park around 5-6ish if you are going to be around. remember I am right down rt1 in laurel
#6904
MegaSquirt Mod
Originally Posted by eage8
no, jason just said that I didn't really need to diconnect it, and he said it was going to be a pain in the butt to set right again.
I'd recommend setting the leading ignition up with trailing turned off ... then turn on trailing after you set the timing.
Jason: why do you think it's so hard to set? It took me literally 5 minutes to get the wheel decoder working with the stock CAS on your car, and most of that time was running the wires to the megasquirt and soldering in the connector. Actually setting the timing shouldn't take more than a couple of minutes. Oh, and you really DO need to take out the CAS to set it up for megasquirt, because you'll need to get it in the engine one tooth off from what the stock setup is (on the CAS drive gear inside the engine I mean).
#6906
MegaSquirt Mod
Originally Posted by Tofuball
What are you talking about Ken? It took you like a couple hours to get it right :p
Actually putting in and aligning the CAS took less than 5 minutes. I did it when you weren't home that saturday morning of the disasterous drive to fudds. The problems we had that day had nothing to do with the stock CAS, they had to do with using the stock ignitor with pull-up resistors that were too low of a resistance.
After I put in the CAS, the car fired up on the first try no problem. And that was after 5 minutes of running wires and aligning the CAS.
Last edited by muythaibxr; 08-05-05 at 10:52 AM.
#6907
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Jason. Wanna go up to Myk's this Sunday? I'm gonna steal some Aluminium stock from work and we'll make a custom Wastgate actuator bracket for his T-04...
I'm thinking 1/8th inch or maybe 5/32 inch thick... 6061-T6 should take the heat. Nevermind that it's gonna be bolted to the cold side.
I'm thinking 1/8th inch or maybe 5/32 inch thick... 6061-T6 should take the heat. Nevermind that it's gonna be bolted to the cold side.
#6908
"Really? Awesome! But I cant be free around then to my knowlage, sorry! Got a wedding rehersal to go to! :O"
"I wanna see it too... but I won't be home till like 9 or so."
Damn well 9 is going to be to late. Drop me a line on Sunday. I am heading over to Dan's shop around 1pm to work on the car and hopefully hook up my new profec B
"I wanna see it too... but I won't be home till like 9 or so."
Damn well 9 is going to be to late. Drop me a line on Sunday. I am heading over to Dan's shop around 1pm to work on the car and hopefully hook up my new profec B
#6909
MegaSquirt Mod
Originally Posted by Bukwild
Damn well 9 is going to be to late. Drop me a line on Sunday. I am heading over to Dan's shop around 1pm to work on the car and hopefully hook up my new profec B
I'll be home all day that day most likely building/modding megasquirts for customers.
I may not be a big fan of putting turbos in my own cars... and I may not think they're the only way to go, but I still like seeing stuff I haven't seen before.
#6910
yeah it is something all should see because its just a work of art. the FREE porting that Precision did for me to the front cover is worth the price of emission alone. I am really intrested in seeing how much of a upgrade this new cover is over the standard "S". I have heard conflicting statements. I have heard that you get 200-300 rpm more of lag which is ok if it gives more top end to 7500 rpms. I also heard it sounds like a jet engine spooling up which might be just a must have for cool points when I am passing their car. If their girlfriend has to wonder if their is a jet engine in that little car that just smoked her mans z06 I am cool with that. Also I will be running this at 15lbs until my water injection kit is installed and then running 20-25 as long as I have traction. BDC is doing a tuning session in NC in about 3 weeks and I hope my stuff is ready for that. Might have a "install a full t04 day" at Dans shop. Might be fun for all us rotards to slap a snail on and drink beer/soda
#6912
That one is also sexual
Join Date: Jun 2004
Location: Columbia, MD
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Jason: you ever call Amir and get the problems with my supra straightened out with him?
for the rest of you, internet access is minimal here but i will have my cell starting prob monday. I'm looking into getting high speed access in my room ASAP withOUT paying 80 bucks a month and 1 year contract.
for the rest of you, internet access is minimal here but i will have my cell starting prob monday. I'm looking into getting high speed access in my room ASAP withOUT paying 80 bucks a month and 1 year contract.
#6915
MegaSquirt Mod
From http://www.msefi.com/msinfo/ms2/indexright.htm
Basically it's a much faster chip with a lot more room for growth but the code on it is nowhere near as feature filled or as advanced as the msns-extra...
I'm going to start porting stuff to it from msns-extra, but it probably won't be usable for a few months, and not stable for much longer.
Basically it's a much faster chip with a lot more room for growth but the code on it is nowhere near as feature filled or as advanced as the msns-extra...
I'm going to start porting stuff to it from msns-extra, but it probably won't be usable for a few months, and not stable for much longer.
#6916
Always Coca-Cola
Join Date: May 2004
Location: DMV
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Icesickkle
I guess I'll see you guys at the garage on monday, I dont' have internet at the moment so I have it when i get to the library and thats it. I think I just need to pick up my tranny unless someone wants to by something off me.
I have a 1987 s4 base model 7 that I'm parting everything out of to pay for my new 7 project.
I have everything and a sunroof that I know werks. I had planned to put it in the car but never got around to it.
Call - xxx-xxx-xxxx And I'll pull and bring to the garage!
I have a 1987 s4 base model 7 that I'm parting everything out of to pay for my new 7 project.
I have everything and a sunroof that I know werks. I had planned to put it in the car but never got around to it.
Call - xxx-xxx-xxxx And I'll pull and bring to the garage!
Last edited by gsl-se addict; 04-06-13 at 07:28 AM.
#6920
glass half empty, chug!
Join Date: Mar 2003
Location: Maryland
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
One center console it is, and the price shall be taken over my lunch debt to Jason! AKA you have to buy him lunch...nothing else was specified in the deal.
Jason, I'll be there monday for the tranny.
few and far between
~Scott
Jason, I'll be there monday for the tranny.
few and far between
~Scott
#6922
#6924
Jesus is the Messiah
Originally Posted by AkumaKuruma
Jason: you ever call Amir and get the problems with my supra straightened out with him?
for the rest of you, internet access is minimal here but i will have my cell starting prob monday. I'm looking into getting high speed access in my room ASAP withOUT paying 80 bucks a month and 1 year contract.
for the rest of you, internet access is minimal here but i will have my cell starting prob monday. I'm looking into getting high speed access in my room ASAP withOUT paying 80 bucks a month and 1 year contract.
Originally Posted by Icesickkle
One center console it is, and the price shall be taken over my lunch debt to Jason! AKA you have to buy him lunch...nothing else was specified in the deal.
Jason, I'll be there monday for the tranny.
few and far between
~Scott
Jason, I'll be there monday for the tranny.
few and far between
~Scott
Well, you might be there monday, but I wont! :O