Maryland guys!
#6853
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Originally Posted by eage8
no more cars = no more cars that just sit there, as long as you leave with your car you're fine
I'd really like to help Jason get rid of the empty shells. Plus I'm sure if we got three or four guys on a fully loaded car, we could turn it from a complete FC to the Eyesore in a matter of hours.
When I used to work with the Latinos at the first shop I worked at, we did that to a late 80's BMW 325 and a Mazda 626 GT. Can't get the title for it? Okay. Grab EVERYTHING that's removable and drop it in the shop, roll the flatbed up and winch the chassis on. It's scrap.
Slap up a couple of Cheapo plywood or sheet steel 10x10 sheds from Home Depot and throw all the parts in there. Neatly categorized, stacked, labeled, etc.
Last edited by Pele; 08-02-05 at 10:32 AM.
#6854
1308ccs of awesome
iTrader: (9)
what would we need either for? besides the fact that I think we might need to lift the engine to fit that turbo in >_<
the only think I can think of would be when we do my main pulley... but that doesn't even have to be done before the car is mobile.
you are talking about my car right?
the only think I can think of would be when we do my main pulley... but that doesn't even have to be done before the car is mobile.
you are talking about my car right?
#6855
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Originally Posted by eage8
what would we need either for? besides the fact that I think we might need to lift the engine to fit that turbo in >_<
the only think I can think of would be when we do my main pulley... but that doesn't even have to be done before the car is mobile.
you are talking about my car right?
the only think I can think of would be when we do my main pulley... but that doesn't even have to be done before the car is mobile.
you are talking about my car right?
I need to do a bit of drilling in the frame, and welding to repair some rust holes as well.
#6856
MegaSquirt Mod
Well, it's up to you guys... but if you want easy access to my help, it'll need to be at my house because I'm going to be busy coding (porting msns-extra to ms2, then re-doing rotary bits there), and I won't have time to drive all over the place to help.
I'm close to having something I'm confident in at splits other than 0 split on msns-extra, I'm going to work on it more tomorrow night (since I'm moving the hachi tonight), and hopefully have it done this week. Everything I've done so far has worked, but only on the stimulator... using a CAS causes the number of interrupts on the CPU to jump by a huge amount, so basically I'm just trying to find ways to keep the number of interrupts from causing a problem.
I'm close to having something I'm confident in at splits other than 0 split on msns-extra, I'm going to work on it more tomorrow night (since I'm moving the hachi tonight), and hopefully have it done this week. Everything I've done so far has worked, but only on the stimulator... using a CAS causes the number of interrupts on the CPU to jump by a huge amount, so basically I'm just trying to find ways to keep the number of interrupts from causing a problem.
#6857
1308ccs of awesome
iTrader: (9)
Originally Posted by Pele
Hence the car dolly. I'd only do there what I'd need a lift or some serious air power for. (My dad's 4 gallon air compressor sucks.)
I'd really like to help Jason get rid of the empty shells. Plus I'm sure if we got three or four guys on a fully loaded car, we could turn it from a complete FC to the Eyesore in a matter of hours.
When I used to work with the Latinos at the first shop I worked at, we did that to a late 80's BMW 325 and a Mazda 626 GT. Can't get the title for it? Okay. Grab EVERYTHING that's removable and drop it in the shop, roll the flatbed up and winch the chassis on. It's scrap.
Slap up a couple of Cheapo plywood or sheet steel 10x10 sheds from Home Depot and throw all the parts in there. Neatly categorized, stacked, labeled, etc.
I'd really like to help Jason get rid of the empty shells. Plus I'm sure if we got three or four guys on a fully loaded car, we could turn it from a complete FC to the Eyesore in a matter of hours.
When I used to work with the Latinos at the first shop I worked at, we did that to a late 80's BMW 325 and a Mazda 626 GT. Can't get the title for it? Okay. Grab EVERYTHING that's removable and drop it in the shop, roll the flatbed up and winch the chassis on. It's scrap.
Slap up a couple of Cheapo plywood or sheet steel 10x10 sheds from Home Depot and throw all the parts in there. Neatly categorized, stacked, labeled, etc.
ken, I would deffinitly like access to your help, I'll discuss things with theo and see what we're doing.
#6858
Senior Member
Join Date: Oct 2004
Location: Baltimore
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
SWEEEET!!!
new window ----- installed
new console ----- installed
new dash surround ---- installed
new guage cluster ----- fabricated and installed
new speedo cable ---- pending
new shifter mount ---- pending
oil/filter change ---- pending
so if my luck holds out and i didnt damamge my motor when i blew the gasket on my oil filter coming back from OC then my FC will be up and running once i get a good full day's work in on it... (few and far between)
new window ----- installed
new console ----- installed
new dash surround ---- installed
new guage cluster ----- fabricated and installed
new speedo cable ---- pending
new shifter mount ---- pending
oil/filter change ---- pending
so if my luck holds out and i didnt damamge my motor when i blew the gasket on my oil filter coming back from OC then my FC will be up and running once i get a good full day's work in on it... (few and far between)
#6859
commit(rnd()&sense-acts)
Originally Posted by DarkAngelKamui
$8 for water? That **** better be endorsed by Jesus before i'd pay for it....
(PM me for times and directions )
#6860
Attack Gas Station!!!!
Join Date: May 2004
Location: Catonsville, Maryland
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
If anyone wants to setup the lm1815 board on my ms, I'll give you money for parts and alc..err food. i have no time whatsoever to work on this thing and my mom's getting impatient that the parts are still on the back porch.
#6861
MegaSquirt Mod
Originally Posted by sudseh
If anyone wants to setup the lm1815 board on my ms, I'll give you money for parts and alc..err food. i have no time whatsoever to work on this thing and my mom's getting impatient that the parts are still on the back porch.
I don't have time to fix it for you at this point, but I can test it again.
#6863
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,847
Received 513 Likes
on
348 Posts
Originally Posted by sudseh
If anyone wants to setup the lm1815 board on my ms, I'll give you money for parts and alc..err food. i have no time whatsoever to work on this thing and my mom's getting impatient that the parts are still on the back porch.
#6864
Jesus is the Messiah
Originally Posted by Pele
Hence the car dolly. I'd only do there what I'd need a lift or some serious air power for. (My dad's 4 gallon air compressor sucks.)
I'd really like to help Jason get rid of the empty shells. Plus I'm sure if we got three or four guys on a fully loaded car, we could turn it from a complete FC to the Eyesore in a matter of hours.
When I used to work with the Latinos at the first shop I worked at, we did that to a late 80's BMW 325 and a Mazda 626 GT. Can't get the title for it? Okay. Grab EVERYTHING that's removable and drop it in the shop, roll the flatbed up and winch the chassis on. It's scrap.
Slap up a couple of Cheapo plywood or sheet steel 10x10 sheds from Home Depot and throw all the parts in there. Neatly categorized, stacked, labeled, etc.
I'd really like to help Jason get rid of the empty shells. Plus I'm sure if we got three or four guys on a fully loaded car, we could turn it from a complete FC to the Eyesore in a matter of hours.
When I used to work with the Latinos at the first shop I worked at, we did that to a late 80's BMW 325 and a Mazda 626 GT. Can't get the title for it? Okay. Grab EVERYTHING that's removable and drop it in the shop, roll the flatbed up and winch the chassis on. It's scrap.
Slap up a couple of Cheapo plywood or sheet steel 10x10 sheds from Home Depot and throw all the parts in there. Neatly categorized, stacked, labeled, etc.
That would make my life so easy/ I'd be totally awesome/
ANYWAY
I just gotta pop the tranny back in the car tommorow, And I need all the help I can get. Can anyone come?
#6865
Jesus is the Messiah
And the thread goes silent! :p
I got rear-ended today on the highway by a chevy truck. I was driving the GXL-SE. (Doh)
(Their fault)
The back end looked fine, like the inside styrofoam just got a little dented, and a plastic part broke off. Nothing major, I jsut got his info and told him not to worry about it unless a wheel fell off or something.
I met Brian yesterday! He's got two TIIs and two MX-6s. Apparently he's on the forum too.
I got rear-ended today on the highway by a chevy truck. I was driving the GXL-SE. (Doh)
(Their fault)
The back end looked fine, like the inside styrofoam just got a little dented, and a plastic part broke off. Nothing major, I jsut got his info and told him not to worry about it unless a wheel fell off or something.
I met Brian yesterday! He's got two TIIs and two MX-6s. Apparently he's on the forum too.
#6867
Jason,
Be carefull on the accident. I had a similar thing happen to me and I got out of the car and was ok no problems. 1 day later no problems. 2 days later I couldn't even get out of bed. Those things work weird like that. Don't mess with your back because it will hurt forever.
Be carefull on the accident. I had a similar thing happen to me and I got out of the car and was ok no problems. 1 day later no problems. 2 days later I couldn't even get out of bed. Those things work weird like that. Don't mess with your back because it will hurt forever.
#6875
That one is also sexual
Join Date: Jun 2004
Location: Columbia, MD
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tofuball
And the thread goes silent! :p
I got rear-ended today on the highway by a chevy truck. I was driving the GXL-SE. (Doh)
(Their fault)
The back end looked fine, like the inside styrofoam just got a little dented, and a plastic part broke off. Nothing major, I jsut got his info and told him not to worry about it unless a wheel fell off or something.
I met Brian yesterday! He's got two TIIs and two MX-6s. Apparently he's on the forum too.
I got rear-ended today on the highway by a chevy truck. I was driving the GXL-SE. (Doh)
(Their fault)
The back end looked fine, like the inside styrofoam just got a little dented, and a plastic part broke off. Nothing major, I jsut got his info and told him not to worry about it unless a wheel fell off or something.
I met Brian yesterday! He's got two TIIs and two MX-6s. Apparently he's on the forum too.