Hampton Roads (SE Virginia) Rotary Club
07-29-12, 08:54 PM
#9577
Full Member
Join Date: Oct 2002
Location: Yorktown,,VA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Hey just posted a set of stock 3rd gen rims Chrome, r1 strut tower brace, and a Koyo radiator If any one is interested. Also have an almost new....100 miles or less Apexi exhaust for a 3rd Gen. Also the front lip spoiler for a CYM R1.. Let me know if u r interested.
08-02-12, 10:37 PM
#9580
yeah its a rotary
iTrader: (1)
Join Date: Aug 2005
Location: Va Beach or IN, indianapolis
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Okay, didn't know where to ask this but I need to know where i can go to get an inspection sticker in Virginia Beach. My car passes with flying colors on everything except one thing. My seatbelt light has not wanted to turn off after buckling up for about two months now. I took it to a couple shops to see if it would pass with this issue. Everywhere i take it says they will fail me because of a stupid light bulb won't turn off! WTF?!? Everyone says will have to hook it up to a computer blah blah blah give me money is all I'm hearing from these guys. I know the car is 100% safe and there is nothing wrong with my seatbelts except for the light. I did talk to one guy who suggested pulling the light bulb out but that sounds like a lot of work cause wouldn't i need to pull the whole dash to get the the bulb. I use this car as a daily driver and don't have the time to pull my dash out cause i work everyday.
Any suggestions or a place that will over look this (in my opinion) non issue?
Any suggestions or a place that will over look this (in my opinion) non issue?
08-05-12, 12:23 PM
#9581
Rotary Freak
iTrader: (1)
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Fingers crossed, but I may be back on the road soon. Looks like all the smoke I was getting was from old fuel with old Stabil. Drained the tank and put in fresh fuel and the smoke is gone. She's holdin' her coolant and temps are stable. Just need to reset the PFC, let it learn idle, brakes, inspection and new tags left to go.
08-13-12, 01:41 PM
#9585
1st Gens are the Best
iTrader: (2)
Join Date: Apr 2012
Location: Virginia Beach
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
I need some FB part too! Need some parts from the underside of the car. Need a few parts that connect to the front fenders (don't know what they are called) and also the exhaust shield between the gas tank and the muffler. Need some nuts/bolts/connecters as well.
09-12-12, 09:45 AM
#9589
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys long time!
Still trying to sell the 88 FC, somethings up with the motor so 750 OBO for rolling chassis complete interior plus a few aftermarket parts
and Im mulling over selling the FB Id like to get 2000 for it and I feel thats a fair price for a vehicle that just needs a bit of fuel mapping.
money made from these will be funneled into our 3rd gen that will be coming up in the lineup of projects soon.
Still trying to sell the 88 FC, somethings up with the motor so 750 OBO for rolling chassis complete interior plus a few aftermarket parts
and Im mulling over selling the FB Id like to get 2000 for it and I feel thats a fair price for a vehicle that just needs a bit of fuel mapping.
money made from these will be funneled into our 3rd gen that will be coming up in the lineup of projects soon.
09-12-12, 10:09 AM
#9590
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
need a turbo2 bellhousing and starter. text me 7862998359 if you got one
need it for this:
Danny Domenech's FD RX-7 - YouTube
need it for this:
Danny Domenech's FD RX-7 - YouTube
09-12-12, 10:16 AM
#9591
Not a Racist
Join Date: Aug 2003
Location: virginia
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Is anyone out there looking to build , rebuild , or just need some parts . I'm looking to make some room in my garage and I have a little bit of everything .Some 1st gen , tons of 2nd gen , and again , some 3rd gen. Tell me what you are looking for and I'll go out and do a small search and destroy in my garage .
Va
Va
and in that case ill be looking for a s5 short block as long as theres no housing damage ill take it running or blown..
and also... a bit of an update
I have one of these now
10-15-12, 11:02 AM
#9596
Introducing myself
Hey everybody,
Woodmv here. I'm relatively new to the forum and just got my hands on my very own 79 earlier this month. It was my father's, and my brother's before that. I have a build thread going on it if you want to check it out - it's titled "My 79 "barn find" project" and is on the 1st gen build thread section. check it out.
I got it fired up this weekend and it's the first time in three years it's been run. Hasn't been driven in about 9 years but it's getting close.
Anyway, looking to reach out to other "7" owners in the area in case I need to ask a question or two, and I will have to as I go, and wanted to introduce myself.
Take care!
Woodmv
Woodmv here. I'm relatively new to the forum and just got my hands on my very own 79 earlier this month. It was my father's, and my brother's before that. I have a build thread going on it if you want to check it out - it's titled "My 79 "barn find" project" and is on the 1st gen build thread section. check it out.
I got it fired up this weekend and it's the first time in three years it's been run. Hasn't been driven in about 9 years but it's getting close.
Anyway, looking to reach out to other "7" owners in the area in case I need to ask a question or two, and I will have to as I go, and wanted to introduce myself.
Take care!
Woodmv
10-16-12, 07:02 AM
#9597
Hey everybody,
Woodmv here. I'm relatively new to the forum and just got my hands on my very own 79 earlier this month. It was my father's, and my brother's before that. I have a build thread going on it if you want to check it out - it's titled "My 79 "barn find" project" and is on the 1st gen build thread section. check it out.
I got it fired up this weekend and it's the first time in three years it's been run. Hasn't been driven in about 9 years but it's getting close.
Anyway, looking to reach out to other "7" owners in the area in case I need to ask a question or two, and I will have to as I go, and wanted to introduce myself.
Take care!
Woodmv
Woodmv here. I'm relatively new to the forum and just got my hands on my very own 79 earlier this month. It was my father's, and my brother's before that. I have a build thread going on it if you want to check it out - it's titled "My 79 "barn find" project" and is on the 1st gen build thread section. check it out.
I got it fired up this weekend and it's the first time in three years it's been run. Hasn't been driven in about 9 years but it's getting close.
Anyway, looking to reach out to other "7" owners in the area in case I need to ask a question or two, and I will have to as I go, and wanted to introduce myself.
Take care!
Woodmv
11-01-12, 03:29 PM
#9598
Senior Member
Join Date: Oct 2002
Location: Hampton, VA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
I just PCS'd to Langley today and was wondering if there's anything going on around here? My FD just endured a 475 mile trek after 4 years of being in storage and she took it pretty well. Now to get a house with a garage so I can get to wrenching on it again!
11-05-12, 02:57 PM
#9600
Senior Member
Join Date: Oct 2002
Location: Hampton, VA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
I would like to live around here, but I'm not planning on staying for the long haul. Nothing against VA (or anywhere in the US for that matter) but I plan on getting back overseas ASAP. That said, looking more for a place to rent, preferably with a garage.
In other news, went out Friday night to Newport News to see what the kids were up to out there. I heard they gather at Home Depot there, so I went to check it out with a buddy I just met in his RX8. We were the only rotaries, but one of the guys there has an FC Vert that's undergoing a T2 swap.
Anything else happening in the area?
In other news, went out Friday night to Newport News to see what the kids were up to out there. I heard they gather at Home Depot there, so I went to check it out with a buddy I just met in his RX8. We were the only rotaries, but one of the guys there has an FC Vert that's undergoing a T2 swap.
Anything else happening in the area?